Table of Contents
Advertisement
Installing the Device
2.4.2 Mounting the Device to a Panel
Removing the Device
To remove the device from a DIN rail, do the following:
1.
Insert a flathead screwdriver into the slot of the sliding release and move it
down.
1
2
Figure 2.3
2.
Swing the bottom of the device away from the DIN rail.
3.
Lift the device off the DIN rail.
2.4.2
Mounting the Device to a Panel
For panel installations, the RUGGEDCOM RSG907R can be equipped with panel
adapters on the top and bottom of the chassis. The adapters allow the device to be
attached to a panel using screws.
10
All manuals and user guides at all-guidesbox.com
DIN Rail
DIN Rail Adapter
Removing the Device from a DIN Rail
3
1
2
1
Installation Manual, 02/2021, C79000-G8976-1387-12
2
RUGGEDCOM RSG907R
Advertisement
Table of Contents
