Table of Contents
Advertisement
Installation Overview
Installing an AP involves the following high-level tasks.
•
•
•
•
Performing a Preinstallation Configuration (Optional)
The following procedures describe the processes to ensure that your AP installation and initial operation go
as expected.
Note
The following illustration shows the preinstallation configuration setup:
Perform the following steps:
Performing a Preinstallation Configuration (Optional), on page 17
Preinstallation Checks and Installation Guidelines, on page 19
Mounting the Access Point, on page 20
Powering the Access Point, on page 29
Performing a preinstallation configuration is an optional procedure. If your network controller is properly
configured, you can install your AP in its final location and connect it to the network from there. For more
information, see
Deploying the Access Point on the Wireless Network, on page
Cisco Catalyst Wireless 9166D1 Wi-Fi 6E Access Point Hardware Installation Guide
4
C H A P T E R
32.
17
Advertisement
Table of Contents
Troubleshooting
