Functions Of The Saddle Stitch Finisher - Sharp AR-F14 Operation Manual

Saddle stitch finisher

Table of Contents

Supplies

The following staple cartridge is required as a supply for the saddle stitch finisher:

G AR-SC2

Staple Cartridge (approx. 5000 staples x 3)

FUNCTIONS OF THE SADDLE STITCH FINISHER

I Sort function

Collates printed pages

Originals

I Offset function

Offset function "ON"

I Staple sort function

Each set of output is collated by the sort function, stapled, and delivered to the upper (offset) tray.

Three stapling positions are available: top left staple, two left staples, or lower left staple.

I Saddle stitch (Pamphlet stapling) function

Each set of output is stapled in two places along

the centerline of the paper, folded (with the side

facing up inside), and delivered to the lower (saddle

stitch) tray. In the factory default settings, the

saddle stitch finisher is set to staple and fold sets

after "Pamphlet copy" is performed. If desired, the

"Pamphlet copy" function can be disabled using the

key operator programs.

"Pamphlet copy" is used to copy two originals onto the front side and two originals onto the back side of each

Note

sheet of paper for easy creation of a pamphlet (See the operation manual for copier).

Output

Offset function "OFF"

I Group function

Groups printed pages by page

Originals

The offset function offsets each set of output from

the previous set for easy separation. (On the

saddle stitch finisher, the offset function is only

possible using the offset tray.)

The offset function does not operate when the

staple sort function is selected.

Output

Table of Contents