Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Yamaha TP-6220
Summary of Contents for Yamaha TP-6220
- Page 1 PEDAL TIMPANI TIMBALE À PÉDALE TIMBAL DE PEDAL 踏板定音鼓 TP-62 20 /23 /26 /29 /32 TP-42 23 /26 /29 /32 TP-50 20(G/H) /23 (G/H) /26 (G/H) /29 (G/H) /32 (G/H) TP-70 20(H) /23(H) /26(H) /29(H) /32(H) TP-72 20 / 23 / 26 / 29 / 32 Owner’s Manual Mode d’emploi Manual de Instrucciones...
- Page 2 Your new Yamaha instrument, like all Yamaha musical instruments, is the result of careful planning, testing and assembly using select materials. Proper care will ensure that your Yamaha instrument will deliver its full and rich sound for years to come.
-
Page 3: Nomenclature & Lubrication
Nomenclature & Lubrication Head Protector Kettle Edge Tuning Bolt Head Hoop (Counter Hoop) Tuning Indicator (Tuning Gauge) Pointer Lock Nut Pointer Adjustment Knob Kettle PAC Adjustment Bolt Strut The TP-50xx (H/G) / TP-70xx (H) series use a wing bolt on the Caster PAC adjustment system. - Page 4 Before Using The Pedal Timpani Your Yamaha pedal timpani is equipped with a plastic head carefully mounted and tuned (adjusted to a note) at the factory, and thus can be used after setup immediately. However, new heads will tend to stretch gradually during shipping and storage, resulting in a tuning deviation when you receive the instrument.
- Page 5 Before Using The Pedal Timpani Using the supplied timpani key, tighten the tun- Tighten each tuning bolt by 1/8 of a turn (45°) in ing bolts by 1/4 of a turn (90°) in the order the order shown in step shown below.
-
Page 6: Head Tuning
26” timpani should be tuned to A. When tuned properly, your Yamaha timpani will give Lightly strike the head with the mallet about 2 you its full tonal range without being inch (5 cm) from the kettle edge at each tuning overtensioned. -
Page 7: Pedal Adjustment
Timpani key Spring G Pedal balance spring mechanism Your Yamaha pedal timpani is equipped with a unique pedal balance spring mechanism (a coil spring coun- teracting the tension of the head) which allows you to freely change the pitch (note) of the instrument at an instant. -
Page 8: Tuning Indicator Adjustment
26” timpani — see “Standard Tonal Ranges for Yamaha Timpani” on page 6) to the position Pointer does not reach lower rail end when where its center line coincides with the pointer. -
Page 9: Other Features
The PAC (Pedal Adjustment Clutch) is an original pedal from jumping up when the head is re- Yamaha mechanism that enables you to adjust the pedal’s rotational torque (the force required to move moved.) the pedal) by altering the amount of friction within the •... - Page 10 Moving And Setup Your Timpani G Attaching and Removing the Third Wheel The timpani can easily be moved when the third wheel is attached to the pedal section as shown on the right. Attaching and removing the third wheel can Pedal Mounting plate be performed easily.
-
Page 11: Replacing The Head
Place the new head with the hoop on the kettle. the spring force, the heel of the pedal must be When using a Yamaha timpani head, its YAMAHA kept down (this can easily be accomplished by logo must be on the side opposite the pedal.