Page 2
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
• RTLS4030T (FCC/NOM/ANATEL; article number: 6GT2700-3DA13) • RTLS4030T (CMIIT; article number: 6GT2700-3DA23) • RTLS4030T (ISED; article number: 6GT2700-3DA33) Further documentation You can find the complete documentation for all SIMATIC RTLS products at the following address: Link: (https://support.industry.siemens.com/cs/us/en/ps/25277) Trademarks The following and possibly other names not identified by the registered trademark sign ®...
Page 6
Introduction Industry Online Support In addition to the product documentation, the comprehensive online information platform of Siemens Industry Online Support offers support at the following Internet address: (https://support.industry.siemens.com/cs/start?lc=en-US) Apart from news, there you will also find: • Project information: Manuals, FAQs, downloads, application examples etc.
Page 7
Use of product versions that are no longer supported, and failure to apply latest updates may increase customer’s exposure to cyber threats. To ensure that you are always informed about product updates, subscribe to the Siemens Industrial Security RSS feed at: (https://www.siemens.com/cert) Note on firmware/software support Check regularly for new firmware/software versions or security updates and apply them.
Page 8
Do not dispose of the products at public disposal sites. For environmentally compliant recycling and disposal of your electronic waste, please contact a company certified for the disposal of electronic waste or your Siemens representative. Note the different national regulations.
Device description Characteristics SIMATIC RTLS4030T Characteristics Design ① Status indicators (LED) ② Battery compartment General The transponder is the mobile device for localization in the RTLS localization system. It sends position data to gateways which transmit the data to the Locating Manager server. Order data RTLS4030T Table 2- 1 Order data RTLS4030T...
Device description 2.3 LED status indicator LED status indicator The operating states of the transponder are indicated by the LED. These can assume the states from and briefly light up . Meaning Red LED is off when the transponder is in operation Red LED lights up once for 1.5 seconds at system startup Flashes red (user LEDs flash) if you trigger flashing via the Locating Manager.
Installation & Operation Notes on installation Note Before you install the transponders, read this section carefully to ensure problem-free installation and commissioning. The transponders can only be used in conjunction with the RTLS localization system. The radio address of the transponder can be obtained from the data matrix code printed on the transponder.
Page 12
These technologies are also used by SIMATIC RTLS. However, interferences can still be caused by other radio devices. Arrangements are being made here, too, so that these interferences do not impact the operation of the RTLS localization system.
Improper opening or repair of the transponder may result in serious risks for the user. Opening the transponder without permission renders the warranty of the Siemens AG null and void. Do not clean the enclosure with liquids or abrasive, caustic or flammable cleaning products.
Technical specifications Table 4- 1 Technical specifications of the RTLS4030T transponder 6GT2700-3DA03, 6GT2700-3DA13 6GT2700-3DA23, 6GT2700-3DA33 Product name SIMATIC RTLS4030T PULSE radio frequencies (localization) Wireless method IEEE 802.15.4-2015 UWB HRP PHY Transmission speed 850 Kbps Operating frequency rated value 3993.6 MHz (UWB channel 2; CE, FCC, NOM, ANATEL) 6489.6 MHz (UWB channel 5;...
Page 16
Technical specifications 6GT2700-3DA03, 6GT2700-3DA13 6GT2700-3DA23, 6GT2700-3DA33 Permitted ambient conditions Ambient temperature • During write/read access • -10 ... +50 °C • Outside write/read access • -10 ... +50 °C • During storage • -10 ... +50 °C Design, dimensions, weights and connectors Dimensions (L x W x H) 89 x 29 x 30 mm Weight...
Process Automation DE-76181 Karlsruhe Germany Importer UK: Siemens plc, Manchester M20 2UR You can find the current UK Declaration of Conformity for these products on the Internet pages under Siemens Industry Online Support (https://support.industry.siemens.com/cs/en/en/view/109801531). SIMATIC RTLS4030T Operating Instructions, 05/2023, C79000-G8976-C520-08...
Page 18
Approvals The SIMATIC RTLS products described in this document meet the requirements of the following directives/regulation: • Radio Equipment Regulations: SI 2017/1206 Radio Equipment Regulations 2017, and related amendments • RoHS Regulations: SI 2012/3032 Restriction of the Use of Certain Hazardous Substances in Electrical and...
Page 19
3.2 of the Directive 2014/53/EU; Part 2: Requirements for UWB location tracking FCC information Siemens SIMATIC RTLS4030T (MLFB 6GT2700-3DA13); FCC ID SCF4030T02 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:...
Page 20
In order to comply with FCC RF Exposure requirements, this device must be installed to provide at least 20 cm separation from the human body at all times. ISED information Siemens SIMATIC RTLS4030T (MLFB 6GT2700-3DA33); IC ID 267X-4030T02 NOTICE (RSS-Gen Issue 5) This device complies with license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s).
Page 21
(TR CU) NOM información Siemens SIMATIC RTLS4030T (MLFB 6GT2700-3DA13); IFT RCPSIRT19-1566 La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no...