Stopping The Engine; Recycling The Clippings - Toro Super Recycler 20797 Operator's Manual

Hide thumbs Also See for Super Recycler 20797:

Table of Contents

sides, and the mower will automatically keep pace with

you (Figure 16).

Stopping the Engine

Release the blade control bar (Figure 17).

Important: When you release the blade control

bar, the blade should stop within 3 seconds. If

it does not stop properly, stop using your mower

immediately and contact an Authorized Service

Dealer.

Your mower comes from the factory ready to recycle the

grass and leaf clippings back into the lawn.

If the side discharge chute is on the mower, remove it

and lock the side discharge door (refer to Removing the

Side Discharge Chute) before recycling the clippings.

Important: Ensure that the rear discharge plug

is locked in place. To lock the plug: Raise the

discharge deflector (Figure 18), firmly push the

plug in until it snaps into place behind the tabs, and

rotate the lever on the plug to the left (Figure 19).

Figure 16

Figure 17

1. Discharge deflector

1. Lever

Note: To unlock the plug, rotate the lever on the plug

to the right (Figure 19).

Figure 18

2. Rear discharge plug

Figure 19

2. Tabs

Table of Contents