Table of Contents
Advertisement
12
www.aeg.com
4.11 OffSound Control
(Deactivating and activating
the sounds)
Deactivate the hob. Touch
seconds. The display comes on and goes
out. Touch
comes on. Touch
choose one of the following:
•
- the sounds are off
•
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
4.12 Power management
function
• Cooking zones are grouped
according to the location and number
of the phases in the hob. See the
illustration.
5. FLEXIBLE INDUCTION COOKING AREA
WARNING!
Refer to Safety chapters.
5.1 FlexiBridge function
The flexible induction cooking area
consists of four sections. The sections
can be combined into two cooking zones
with different size, or into one large
cooking area. The sides of the zones
which operate together light up, and
they are linked with shorter illuminated
lines. You choose the combination of the
sections by choosing the mode
applicable to the size of the cookware
you want to use. There are three modes:
Standard (activated automatically when
you activate the hob), Big Bridge and
Max Bridge.
for 3
for 3 seconds.
or
of the timer to
you can
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
To set the heat setting use
two left side control bars.
Switching between the modes
To switch between the modes use sensor
field:
.
Advertisement
Table of Contents
