Table of Contents
Advertisement
Backhaul FM4200 Mobi
Cisco Ultra-Reliable Wireless
7.6.9. NTP Configuration
All Fluidmesh radio transceiver units have a built-in clock.
No manual time-setting controls are provided. Instead, the unit has
network time protocol (NTP) functionality that allows it to synchronize its
time settings with a chosen internet time server. If the unit cannot
synchronize with its primary time server, and the host name of a backup
time server is entered, the unit defaults to synchronizing with the backup
server.
To change the NTP settings, do the following steps:
1.
Click the -ntp link under ADVANCED SETTINGS in the left-hand
settings menu.
• The NTP dialog will be shown
2.
Enable NTP synchronization by checking the Enable NTP check-
box.
3.
Enter the host name of a chosen primary NTP server in the NTP
server hostname: field.
© 2020 Cisco and/or its affiliates. All rights reserved.
CAUTION
The same NTP configuration must be set for all Fluidmesh
units in the wireless network.
If the same NTP settings are not applied to all units, the
network may encounter timestamp conflicts and/or equipment
malfunctions.
Figure 44. Configurator GUI (NTP dialog)
IMPORTANT
The NTP server host names shown in
(page 115)
are for reference purposes only. Your
company policy may dictate that you use one or more
specific time servers.
(Figure 44 (page
115)).
Figure 44
Page 115 of 177
Advertisement
Table of Contents
