Table of Contents
Advertisement
Moving the Discharge Chute
Push and hold the blue trigger cap down and move
the Quick Stick to the left to move the discharge
chute to the left; move the Quick Stick to the right to
move the discharge chute to the right.
m-6904
Moving the Chute Deflector
Push and hold the blue trigger cap down and move
the Quick Stick forward to lower the chute deflector;
move it rearward to raise the chute deflector.
13
Throwing Snow
When the snowthrower is in operation, the
impeller and auger can rotate and cut off or injure
hands and feet.
Before adjusting, cleaning, inspecting,
troubleshooting, or repairing the
snowthrower, stop the engine and wait for all
moving parts to stop. Disconnect the wire
from the spark plug and keep it away from the
plug to prevent someone from accidentally
starting the engine.
Remove an obstruction from the discharge
chute; refer to Unclogging the Discharge
Chute on page 14. If necessary, use a stick,
not your hands , to remove an obstruction
from the discharge chute.
Stay behind the handles and away from the
discharge opening while operating the
snowthrower.
Keep face, hands, feet, and any other part of
m-6904
your body or clothing away from concealed,
moving, or rotating parts.
The rotor blades can throw stones, toys, and
other foreign objects and cause serious personal
injury to the operator or to bystanders.
Keep the area to be cleared free of all objects
that the rotor blades could pick up and throw.
Keep all children and pets away from the area
of operation.
Operating Tips
Always set the throttle to the Fast position when
throwing snow.
If the engine slows down under a load or the
wheels slip, shift the snowthrower into a lower
gear.
If the front of the snowthrower rides up, shift the
snowthrower into a lower gear. If the front
continues to ride up, lift up on the handles.
3329-779
Danger
Warning
Advertisement
Table of Contents
