Cisco Aironet 1815w Getting Started Manual page 8

Unpacking the AP

To unpack the access point, follow these steps:

Step 1

Unpack and remove the access point and the mounting accessories, from the shipping box.

Return any packing material to the shipping container and save it for future use.

Step 2

Step 3

Verify that you have received the items listed below. If any item is missing or damaged, contact

your Cisco representative or reseller for instructions.

The access point

–

Mounting wall-plate bracket AIR-AP-BRACKET-W3, and screws.

–

Torx security screw and mylar label to cover the screw.

–

The following accessories can be ordered separately from Cisco:

• Spacer kit AIR-AP1815W-KIT=, includes spacer box, RJ-45 jumper cable, four M3.5x32

mounting screws, two #6-32x1.62" truss head machine screws, two M3x8 pan head mounting

screws.

• Physical security kit AIR-SEC-50=, which includes 50 security screws used to secure the access

point onto the wall-mounting bracket, 50 RJ-45 block-out plugs and 2 unlock keys for blocking

physical access to the RJ45 Ethernet ports.

• Bracket Kit AIR-AP-BRACKET-W3, includes the mounting bracket, one M2x5.5 Torx security

screw , two M3.5x32 pan head mounting screws, two #6-32x0.81" truss head machine-type

mounting screws.

Table of Contents