Table of Contents
Advertisement
the MR45" section.
Electrical Junction Box Mount Using Mount Cradle
The MR45 can be mounted to a 4" square cable junction box, a 3.5 or 4" round cable junction box, or various U.S.
and European outlet boxes (mounting screws are not included).
Using appropriate mounting hardware for your specific type of junction box, attach the mount cradle to the
junction box
Power the MR45
If mounting to an electrical junction box, feed the Ethernet cable through the cable access hole in the mount cradle. If
mounting to a wall or ceiling, the Ethernet cable will feed from behind the MR45. The "Power Source Options" section of
this document lists the different powering options and their unique characteristics.
Mount the MR45
Attach the MR45 to the Mount Cradle
(This section applies to wall and/or solid ceiling, drop ceiling or electrical junction box mount
where you have already installed the mount cradle.)
The MR45 attaches to the mount cradle with two tabs on the cradle that insert into the MR45, and is secured to the
cradle using one screw.
To attach the MR45 to the mount cradle properly, line up the top edge of the AP with the top tab of the mount cradle.
Since the cradle is already mounted to the wall, guide the MR45 towards the top tab and insert the top tab into the
MR45s slot.
12
Advertisement
Table of Contents
