Table of Contents
Advertisement
Date: 2021-01-13
Version: 1.2
1.6
Safety Notes
When working on or with the assembly, observe the following general safety instructions:
1. The safety instructions must be observed at all times to prevent accidents.
2. The regulations and information in the operating instructions and in the user documenta-
tion of third-party products as well as all safety instructions must be observed to ensure
safe and reliable operation of the assembly.
Observing this information helps identify hazards and prevent dangerous situations.
Observing these safety instructions is a precondition for workplace design.
They must be made available to all users before performing any action on the plant
and the plant components and must, in part, be contained in the personnel briefing
and training.
3. The Occupational Safety Provisions and Accident Prevention Regulations of the relevant
country are applicable in which the component is operated.
The operating company of the system is responsible for implementing these provi-
sions.
4. Only trained and instructed expert staff may undertake conversion of the component.
5. For work on the assembly, the personnel has to have access to personal protective
equipment such as protective work wear, safety gloves, helmet and safety goggles.
6. In the event of a fault, the assembly has to be switched off and a fault message has to be
displayed.
Please inform the manufacturer about the fault if the fault cannot be eliminated easily.
If necessary, it has to be ensured that the master switch and the shut-off valves on the
maintenance units are switched off and secured against accidental start before any
work on the assembly is carried out.
Troubleshooting and elimination of faults may only be carried out by trained expert
staff.
7. Persons can be injured severely, even die, due to moving plant parts (e.g. robot) and
components (e.g. gripper).
Working in the cell (protected area) is only allowed with secured lockout bar/padlocks.
All work within the cell must be performed only by trained, briefed specialists.
Never override the safety devices! They are intended to protect your life.
© 2021 ABB Automation GmbH |
Overhaul instructions
Central lubrication unit
General information
DANGER
Page 9 of 50
en
Advertisement
Table of Contents
