Download Print this page

Checking The Engine-Oil Level; Checking And Adjusting The Skids - Toro SnowMaster 724 ZXR Operator's Manual

Snowthrower

Hide thumbs Also See for SnowMaster 724 ZXR:

Table of Contents

Available languages

Checking the Engine-Oil Level

Service Interval: Before each use or daily

Figure 13

Checking and Adjusting the

Skids

Service Interval: Yearly

Check the skids to ensure that the auger does not contact the

paved surface. Adjust the skids as needed to compensate for

wear

(Figure

14).

1. Loosen the skid bolts.

2. Slide a 5 mm (3/16 inch) board underneath the scraper.

Note: Using a thinner board will result in a more

aggressive scraper. A thicker board will result in a less

aggressive scraper.

3. Lower the skids to the ground.

Note: Ensure that the skids are flat on the ground.

4. Tighten the skid bolts.

Figure 14

Table of Contents

Table of Contents

36001