Advertisement
Quick Links
RA-1000/RA-1000R
Remote Fire Annunciator
Product Installation Document
1 Description
The RA-1000 (gray) and RA-1000R (red) are optional 4x20 remote
annunciators that can be surface or flush-mounted.
Figure 1 RA-1000/R Remote Annunciator
2 Compatibility
The RA-1000/R is compatible with Honeywell Farenhyt FACPs. For
more information, see the FACP Installation manual.
Document 151154:F
2/15/2022
Farenhyt™ Series
FIRE ALARM ANNUNCIATOR
ECN: 151770
3 Specifications
Parameter
Operating Voltage:
Current
Standby:
Alarm:
Operating Temperature:
backbox
6.44"
(16.35cm)
1
.25
"
8
.125
" (20.64cm)
(3.175cm)
Figure 2 Annunciator Dimensions
4 Installing the RA-1000/R
RA-1000/R installation involves the following steps:
1.
Ensure power is turned off at the panel.
2.
Mount the RA-1000/R in the desired location.
3.
Connect the RA-1000/R to the panel (see Figure 5).
4.
Use the DIP switches on the back of the RA-1000/R to assign an ID
number. See the FACP Manual for more details.
5.
The new RA-1000/R module must be added to the system through
programming. The JumpStart
the module automatically. Refer to the FACP Manual for more
information.
5 Mounting
The RA-1000/R comes from the factory fully assembled. You must dis-
assemble it for mounting. To disassemble the annunciator, use a 5/64"
hex wrench to remove the set screws, located on the bottom of the
annunciator bezel.
Value
24 VDC
58 mA
68 mA
0° to 49° C (32° to 120° F)
bezel
7
.375
"
(18.73cm)
®
Auto-programming feature will add
side
view
1
.25
"
(3.175cm)
Advertisement
Related Manuals for Honeywell Farenhyt RA-1000
Summary of Contents for Honeywell Farenhyt RA-1000
- Page 1 ” (3.175cm) 2 Compatibility Figure 2 Annunciator Dimensions The RA-1000/R is compatible with Honeywell Farenhyt FACPs. For more information, see the FACP Installation manual. 4 Installing the RA-1000/R RA-1000/R installation involves the following steps: Ensure power is turned off at the panel.
- Page 2 5.1 Surface Mounting 5.2.1 Flush-Mounting with an Electrical Box The RA-1000/R can be mounted directly to a surface or can be attached The RA-1000/R annunciator can be used with the following types of to a single, double, or four-square electrical box. Trim Ring Kit 5860TG electrical boxes: 4S, single-gang, and double-gang.