Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZWF842D1DG
Summary of Contents for Zanussi ZWF842D1DG
- Page 1 User Manual GETTING STARTED? EASY. ZWF842D1DG EN User Manual Washing Machine...
-
Page 2: Safety Information
VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. -
Page 3: General Safety
GENERAL SAFETY This appliance is for washing domestic-type, machine-washable • laundry only. This appliance is designed for single household domestic use • in an indoor environment. This appliance may be used in, offices, hotel guest rooms, bed • & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS INSTALLATION • Make sure not to cause damage to the mains plug and to the mains cable. Should the mains The installation must comply with cable need to be replaced, this must be carried relevant national regulations. out by our Authorised Service Centre. •... -
Page 5: Product Description
• Do not touch the glass door while a programme professional repairers, and that not all spare operates. The glass can get hot. parts are relevant for all models. • Make sure that all metal objects are removed • Concerning the lamp(s) inside this product and from the laundry. -
Page 6: Technical Data
Control panel Inlet hose connection Door handle Mains cable Rating plate Transit bolts Feet for levelling the appliance Hose support Drain hose The rating plate reports the model name (A) , product number (B), electrical ratings (C) and serial number (D). Mod. -
Page 7: Information For Installation
UNPACKING WARNING! It is possible to see water flowing from the drain hose. 1. Open the door. Remove all the items from the This is because the washing drum. machine has been tested at the factory. 4. Remove the three transit bolts and pull out the plastic spacers. - Page 8 CAUTION! Make sure there is no damage to hoses and there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Contact the service centre for a replacement inlet hose. 1. Connect the water inlet hose to the back of the 2.
-
Page 9: Installation On Suspended Flooring
INSTALLATION ON SUSPENDED FLOORING Suspended wooden floors are particularly susceptible to vibration. To limit vibration we recommend placing a The end of the drain hose must always waterproof wooden panel, at least 15 mm thick, be ventilated , i.e. the inner diameter of under the appliance. -
Page 10: Stacking Kit
FIXING PLATE KIT If you install the appliance on a plinth that is not an accessory supplied by ZANUSSI, secure the appliance in the fixing plates. Read carefully the instructions supplied with the accessory. -
Page 11: Control Panel Description
CONTROL PANEL DESCRIPTION Programme dial Spin reduction options touch button Display • No Spin option Delay Start touch button • Rinse Hold option FlexiTime touch button • Night option Temp. touch button Start/Pause touch button ON/OFF push button Easy Iron touch button Extra Rinse touch button Prewash touch button DISPLAY... -
Page 12: Dial And Buttons
Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( • Warning code (e.g. FlexiTime bars level indicator. Drum clean indicator. Child safety lock indicator. Add garments indicator. -
Page 13: Permanent Extra Rinse
regularly to reduce creasing. You must drain the The display shows the indicator and the water to unlock the door. selected delay time. After touching the Start/Pause As the programme is very quiet, it is suitable for button, the appliance begins the countdown use at night time when cheaper electricity tariffs and the door is locked. -
Page 14: Programme Chart
PROGRAMMES PROGRAMME CHART Reference spin Programme speed Programme description Default temperature Maximum load Spin speed (Type of load and level of soiling) Temperature range range Eco 40-60 1400 rpm 8 kg White cotton and fast-coloured cotton. (1400- 800 Normally soiled items. The energy consump- 40 °C rpm) tion decreases and the time of the washing... - Page 15 Reference spin Programme speed Programme description Default temperature Maximum load Spin speed (Type of load and level of soiling) Temperature range range 1400 rpm 8 kg White cotton items. This programme removes CleanBoost (1400- 800 micro-organisms thanks to a washing phase 60 °C rpm) with the temperature maintained above 60°C...
- Page 16 Programme ■ ■ ■ ■ ■ ■ ■ ■ ■ Cottons ■ ■ ■ ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ Wool ■ ■ ■ ■ ■ ■ ■ Denim ■...
-
Page 17: Acoustic Signals
Liquid for col- Delicates Programme Liquid Universal Special Universal powder oureds woollens ▲ ▲ 14min Refresh ▲ ▲ 30min Rapid ▲ ▲ ▲ 60min EasyWash 1) At temperature higher than 60 °C the use of powder detergent is recommended. ▲ = Recommended -- = Not recommended SETTINGS ACOUSTIC SIGNALS... -
Page 18: Check The Position Of The Detergent Flap
3. Put the laundry in the drum, one item at a time. Always follow the instructions that you Do not put too much laundry in the drum. find on the packaging of the detergent 4. Close the door firmly. products, but we recommend that you do not exceed the maximum indicated level ( ). -
Page 19: Starting A Programme With The Delay Start
STARTING A PROGRAMME Touch the Start/Pause button to start the programme. It is not possible to start the programme when the indicator of the button is off and doesn't flash (e.g. programme dial on a wrong position). The related indicator stops flashing and stays on. The programme starts, the door is locked. - Page 20 CANCELLING A RUNNING PROGRAMME 2. Touch the Delay Start button repeatedly 1. Press the button ON/OFF to cancel the until the display shows the desired delay time. programme and to deactivate the appliance. 3. Touch the Start/Pause button again to start 2.
-
Page 21: Hints And Tips
END OF THE PROGRAMME 2. Press theStart/Pause button: When the programme has finished, the appliance • If you have set Rinse Hold stops automatically. The acoustic signals operate (if appliance drains the water and spins. they are active). The display shows •... -
Page 22: Stubborn Stains
c. press the Start/Pause button. The spin – liquid detergents, preferably for low phase continues. temperature wash programmes (60 °C max) • Avoid washing garments full of long animal hair for all types of fabric, or special ones for or poor quality garments releasing lots of fluff woollens only. -
Page 23: Water Hardness
WATER HARDNESS To find out the water hardness in your area, contact your local water authority. If the water hardness in your area is high or moderate, we recommend that you use a water Use the correct quantity of water softener. Follow softener for washing machines. - Page 24 If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...
-
Page 25: Care And Cleaning
Problem Possible solution Too much foam in the • Reduce the quantity of detergent. drum during the wash- ing cycle. After the washing cycle, • Make sure that the flap is in the correct position (UP for powder deter- there are some deter- gent - DOWN for liquid detergent). - Page 26 Regular detergents already contain water softening Always follow the instructions that you agents, but we recommend to run a cycle with an find on the packaging of the product. empty drum and a descaling product occasionally. Do not clean the drum with acidic descaling products, scouring products Always follow the instructions that you containing chlorine or iron or steel...
-
Page 27: Cleaning The Inlet Hose And The Valve Filter
4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. 3. Make sure that all detergent residue is removed from the upper and lower part of the recess. Use a small brush to clean the recess. -
Page 28: Emergency Drain
EMERGENCY DRAIN 3. Put the two ends of the inlet hose in a container and let the water flow out of the If the appliance cannot drain the water, carry out hose. the same procedure, described in 'Cleaning the 4. Empty the drain pump. Refer to the emergency drain pump' paragraph. - Page 29 ACCORDING TO UK ECODESIGN FOR ENERGY-RELATED PRODUCTS AND ENERGY INFORMATION REGULATIONS Eco 40-60 pro- Litres hh:mm °C gramme Full load 0.790 52.0 3:25 53.00 39.0 1351 Half load 0.420 42.0 2:40 53.00 30.0 1351 Quarter load 0.165 33.0 2:35 54.00 22.0 1351 1) Maximum spin speed.
-
Page 30: Troubleshooting
Programme Litres hh:mm °C Wool 0.300 60.0 1:05 30.00 30.0 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. 4) It also performs as quick washing cycle for lightly soiled laundry. TROUBLESHOOTING WARNING! Refer to Safety chapters. - Page 32 WWW.ZANUSSI.COM/SHOP...