Table of Contents
Advertisement
Product Overview
1. Anti-scalp roller
2. Front caster wheel
3. Grass deflector
4. Engine
5. Control panel
6. Motion-control levers
Figure 4
7. Hydraulic tank
8. Fuel tank
9. Platform (down position)
10. Fuel-shutoff valve
11. Mower deck
Controls
Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
g402956
1. Malfunction-indicator light
(MIL)
2. Parking-brake lever
3. Hour meter
4. Power-takeoff switch
(PTO)
5. Throttle control
Electronic-Control Unit
Malfunction-Indicator Light
The electronic-control unit (ECU) continuously
monitors the operation of the EFI system.
If a problem or fault within the system is detected, the
malfunction-indicator light (MIL) is illuminated
5).
The MIL is the red light located in the console panel.
When the MIL illuminates, make initial troubleshooting
checks; refer to
If these checks do not correct the problem, further
diagnosis and servicing by an Authorized Service
Dealer is necessary.
Power-Takeoff Switch (PTO)
Use the power-takeoff switch (PTO) to engage
and disengage mower blades or start and stop
powered attachments; refer to
Mower-Blade-Control Switch (PTO) (page
10
Figure 5
6. Key switch
7. Height-of-cut lever
8. Height-of-cut pin
9. Reference bar
10. Motion-control lever
Troubleshooting (page
Operating the
g402968
(Figure
56).
18).
Advertisement
Table of Contents
