Table of Contents
Advertisement
d
Put the extra spool pin in the hole on the top of the
machine and put the thread spool onto the extra spool
pin.
e
Thread the machine with the second upper thread.
Without passing the thread behind the needle bar
thread guide, manually thread the right needle with the
second upper thread.
Insert the thread through the eye of the needle from the
front to the back.
f
Attach zigzag foot "J".
• For details on changing the presser foot, refer to
"Replacing the presser foot" on page 29.
Note
• When using the twin needle, be sure to attach
zigzag foot "J". If bunched stitches occur, use
monogramming foot "N" or attach stabilizer
material.
g
Touch
to unlock all keys and buttons.
h
Touch
and set [Twin Needle] (page 1 of the
settings screen) to [ON].
CAUTION
• When using the twin needle, be sure to select
the twin needle setting, otherwise the needle
may break and cause injury.
i
Select a stitch.
• Refer to "Stitch Chart" on page 41 for stitches that
use a twin needle. You can also sew with a twin
needle when you select a satin stitch pattern. In this
case, use zigzag foot "J".
1 Thread spool
2 Extra spool pin
1 Needle bar
thread
guide
a
CAUTION
• When using the twin needle, be sure to select
an appropriate stitch, otherwise the needle
may break and cause injury.
j
Start sewing.
CAUTION
• Do not try turning the fabric while the twin
needle is down in the fabric, otherwise the
needle may break and cause injury or may
damage your machine.
Utility Stitches
3
57
- Quick Links:
- Names of Machine Parts
- Included Accessories
Hide quick links:
Advertisement
Table of Contents
