Table of Contents
Advertisement
4
Chapter
Embroidering Preparation
Follow the steps below to prepare the machine for
embroidery.
Step 3
Step 1, 2
Step 6
Step 5
Step
Aim
#
1
Presser foot
Attach embroidery foot "Q".
attachment
2
Checking the
Use needle 75/11 for
needle
embroidery.
3
Embroidery unit
Attach the embroidery unit.
attachment
4
Bobbin thread
For the bobbin thread, wind
setup
embroidery bobbin thread and
set it in place.
5
Fabric
Attach a stabilizer material to
preparation
the fabric, and hoop it in the
embroidery frame.
6
Embroidery
Attach the embroidery frame
frame
to the embroidery unit.
attachment
7
Pattern selection Select an embroidery pattern. 67
8
Checking the
Check and adjust the size and
layout
position of the embroidery.
9
Embroidery
Set up embroidery thread
thread setup
according to the pattern.
EMBROIDERY
Step 9
Step 7, 8
Step 4
Action
Page
61
28
62
19
64
66
69
70
Attaching the embroidery foot
CAUTION
• Be sure to use the embroidery foot when doing
embroidery. Using another presser foot may
cause the needle to strike the presser foot. The
needle may break, possibly resulting in injury.
a
Press
(Needle position button) to raise the needle.
b
Touch
.
The screen changes, and all keys and operation
buttons are locked (except
c
Remove the presser foot and presser foot holder.
• For details, refer to "Replacing the Presser Foot" on
page 29.
d
Hold the embroidery foot "Q" with your right hand, as
shown.
Hold the embroidery foot with your index finger
wrapped around the lever at the back of the foot.
a
1 Lever
2 Embroidery foot bar
Embroidering Preparation
).
b
61
4
- Quick Links:
- Names of Machine Parts
- Included Accessories
Hide quick links:
Advertisement
Table of Contents
