Table of Contents
Advertisement
Adjusting the front fork
NOTICE
Use extra care to avoid scratch-
ing the gold-anodized finish
when making suspension ad-
justments.
To avoid damaging the suspen-
sion's internal mechanisms, do
not attempt to turn beyond the
maximum or minimum settings.
For YZF-R1:
This model is equipped with adjustable
suspension. The spring preload, re-
bound damping force, and compres-
sion damping force of each leg can be
adjusted.
WARNING
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
Spring preload
To increase the spring preload and
thereby harden the suspension, turn
EAU66473
the adjusting nut on each fork in direc-
tion (a). To decrease the spring preload
ECA22471
and thereby soften the suspension,
turn the adjusting nut on each fork in di-
rection (b).
(a)
1. Spring preload adjusting nut
Spring preload setting:
Minimum (soft):
0 turn(s) in direction (a)*
Standard:
EWA10181
9 turn(s) in direction (a)*
Maximum (hard):
15 turn(s) in direction (a)*
* With the adjusting nut fully turned in
direction (b)
Rebound damping force
To increase the rebound damping force
and thereby harden the rebound damp-
Instrument and control functions
ing, turn the adjusting bolt on each fork
leg in direction (a). To decrease the re-
bound damping force and thereby soft-
en the rebound damping, turn the
adjusting bolt on each fork leg in direc-
tion (b).
1
(b)
1. Rebound damping force adjusting bolt
Compression damping force
To increase the compression damping
5-40
1
(b)
(a)
Rebound damping setting:
Minimum (soft):
14 click(s) in direction (b)*
Standard:
7 click(s) in direction (b)*
Maximum (hard):
0 click(s) in direction (b)*
* With the adjusting bolt fully turned in
direction (a)
1
2
3
4
5
6
7
8
9
10
11
12
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
