Instrument and control functions
1
1
QS
LIF
A-2
1000 r/min
×
2
03 06
4
03
3
LAP
123
ODO
km/h
MODE -
A
1
PWR
4
3
1. Lap time
5
2. Latest lap time indicator "LATEST"
3. Information display item
6
4. Lap number
7
To use the lap timer
1. Short push the wheel switch. The
information display item will flash
8
for five seconds.
2. While the information display item
9
is flashing, rotate the wheel switch
upward. The lap timer will flash for
five seconds.
10
3. While the lap timer is flashing, long
push the wheel switch to activate
11
the lap timer or stop the lap timer.
4. When the lap timer has been acti-
12
vated, press the Pass/LAP switch
to start the lap timer.
TIP
The engine must be running to use
12 : 00
GPS
the lap timer.
2
Set the information display to
GEAR
LATEST
FASTEST or AVERAGE for addi-
40
N
tional lap time information.
AVERAGE
7890
Accessing the MENU screen will
km
3
2
TCS
SCS
automatically stop the lap timer.
Whenever the lap timer is stopped,
the current lap will not be record-
ed.
The lap time record can be viewed
and reset from the MENU screen.
Oil pressure warning "
This icon, along with the oil pressure
and coolant warning light, comes on
when the engine oil pressure is low.
When the key is first turned to ON, en-
gine oil pressure has yet to build, so this
icon will come on and stay on until the
engine has been started.
NOTICE
If the warning light comes on when
the engine is running, stop the en-
gine immediately and check oil level.
If the oil level is below the minimum
level, add sufficient oil of the recom-
mended type to raise it up to the cor-
rect level. If the oil pressure warning
light remains on even if the oil level
is correct, immediately turn the en-
gine off and have a Yamaha dealer
check the vehicle.
Coolant temperature warning "
This icon comes on if the coolant tem-
perature reaches 117 C (242 F) or
higher. Stop the vehicle and turn off the
engine. Allow the engine to cool.
NOTICE
"
Do not continue to operate the en-
gine if it is overheating.
ECA21210
5-13
"
ECA10022