Table of Contents
Advertisement
Periodic maintenance and adjustment
1
Changing the brake fluid
Have a Yamaha dealer change the
brake fluid at the intervals specified in
2
the periodic maintenance and lubrica-
tion chart. In addition, have the oil seals
3
of the master cylinders and calipers as
well as the brake hoses replaced at the
4
intervals listed below or whenever they
are damaged or leaking.
Oil seals: Replace every two
5
years.
Brake hoses: Replace every four
6
years.
7
8
9
10
11
12
EAU22733
Drive chain slack
The drive chain slack should be
checked before each ride and adjusted
if necessary.
To check the drive chain slack
1. Place the motorcycle on the sides-
tand.
TIP
When checking and adjusting the drive
chain slack, there should be no weight
on the motorcycle.
2. Shift the transmission into the neu-
tral position.
3. Measure the drive chain slack as
shown.
Drive chain slack:
25.0–35.0 mm (0.98–1.38 in)
8-25
EAU22762
EAU22779
1. Drive chain slack
4. If the drive chain slack is incorrect,
adjust it as follows.
To adjust the drive chain slack
Consult a Yamaha dealer before ad-
justing the drive chain slack.
1. Loosen the axle nut and the lock-
nut on each side of the swingarm.
2. To tighten the drive chain, turn the
drive chain slack adjusting bolt on
each side of the swingarm in direc-
tion (a). To loosen the drive chain,
turn the adjusting bolt on each side
of the swingarm in direction (b),
and then push the rear wheel for-
ward. NOTICE: Improper drive
chain slack will overload the en-
1
EAU34318
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
