Table of Contents
Advertisement
Configuring SNMP
Defining Trap Management
STEP 3
STEP 4
ESW 500 Series Switches Administration Guide
-
SNMP V1
— Indicates SNMP Version 1 traps are sent.
-
SNMP V2
— Indicates SNMP Version 2 traps are sent.
The SNMPv3 Notification Recipient area contains the following fields:
•
SNMPv3 — Enables SNMPv3 as the Notification version. If SNMPv3is enabled,
the User Name and Security Level fields are enabled for configuration:
•
User Name — Defines the user to whom SNMP notifications are sent.
•
Security Level — (SNMP v3) Defines the means by which the packet is
authenticated. The possible field values are:
-
No Authentication
encrypted.
-
Authentication
-
Privacy
— Indicates the packet is both authenticated and encrypted.
The UDP Port Notification Recipient area contains the following fields:
•
UDP Port — Displays the UDP port used to send notifications. The default is
162.
•
Filter Name — Indicates if the SNMP filter for which the SNMP Notification filter
is defined.
•
Informs Timeout — Indicates the amount of time (seconds) the device waits
before re-sending informs. The default is 15 seconds.
•
Informs Retries — Indicates the amount of times the device re-sends an inform
request. The default is 3 attempts.
Define the relevant fields.
Click Apply. The SNMP Notification Receivers are modified, and the device is
configured.
Defining SNMP Filter Settings
The Filter Settings Page permits filtering traps based on OIDs. Each OID is linked
to a device feature or a feature aspect. The Filter Settings Page also allows
network managers to filter notifications.
— Indicates the packet is neither authenticated nor
— Indicates the packet is authenticated.
13
356
Hide quick links:
Advertisement
Table of Contents
