Cisco Rps 675; Console Port; Security Slots - Cisco CATALYST 2960 Hardware Installation Manual
Cisco systems switch user manual
Hide thumbs
Also See for CATALYST 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Chapter 1
Product Overview
•
•
•
•
Cisco RPS 675
The Cisco 675 RPS is a redundant power system that supports six network devices and provides power
to one failed switch at a time. It automatically senses when the internal power supply of a connected
switch fails and provides power to the failed switch, preventing loss of network traffic.
The Cisco RPS 675 has two output levels: –48 V and 12 V. The total maximum output power is 675 W.
Console Port
You can connect the switch to a PC by means of the console port and the supplied RJ-45-to-DB-9 female
cable. If you want to connect the switch console port to a terminal, you need to provide an
RJ-45-to-DB-25 female DTE adapter. You can order a kit (part number ACS-DSBUASYN=) containing
that adapter from Cisco. For console port and adapter pinout information, see the
Specifications" section on page
The console port on the Catalyst 2960 8-port switches is on the front panel rather than on the rear panel.
Note
Security Slots
The Catalyst 2960 8-port switches have security slots on the left and right side panels. You can install
an optional cable lock, such as the type that is used to secure a laptop computer, to secure either or both
sides of the switch.
Figure 1-26
Figure 1-26
1
OL-7075-09
List the connected switches and the power-supply module sizes
Obtain reports when a switch is powered by the RPS
Obtain status reports for the RPS power-supply module
Read and monitor backup, failure, and exception history
shows the slot on a left-side panel.
Switch Left Panel
1
Security slot
B-1.
Catalyst 2960 Switch Hardware Installation Guide
Rear Panel Description
"Connector and Cable
1-21
Hide quick links:
Advertisement
Chapters
Table of Contents
