Table of Contents
Advertisement
CHECKING THE FINAL GEAR OIL LEVEL/
CHANGING THE FINAL GEAR OIL
1
a
b
EBS00101
CHECKING THE FINAL GEAR OIL LEVEL
1. Place the machine on a level surface.
2. Remove:
• dipstick 1
3. Check:
• final gear oil level
Oil level should be between the maximum
a and minimum b marks.
Oil level low → Add oil to the proper level.
Recommended oil
SAE80 API "GL-4" Hypoid gear
oil
CAUTION:
_
Take care not allow foreign material to
enter the final gear case.
4. Install:
• dipstick
EBS00102
CHANGING THE FINAL GEAR OIL
1. Place the machine on a level surface.
2. Place a receptacle under the final gear
case.
3. Remove:
• dipstick 1
• final gear oil drain plug 2
4. Drain:
• final gear oil
5. Install:
• final gear oil drain plug
NOTE:
_
Check the gasket (drain plug). If it is damaged,
replace it with a new one.
3 - 24
CHK
ADJ
23 Nm (2.3 m · kg, 17 ft · lb)
- Quick Links:
- Electrical
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
