Table of Contents
Advertisement
EBS01073
TROUBLESHOOTING
If the neutral indicator light fails to come
on.
Check:
1. main fuse
2. battery
3. main switch
4. wiring connections
(of the entire signaling system)
NOTE:
_
• Before troubleshooting, remove the following
part(s):
1. seat
2. front fender
3. C.D.I. magneto cover
• Troubleshoot with the following special
tool(s).
Pocket tester
P/N. YU-03112-C, 90890-03112
EBS01043
1. Main fuse
• Check the main fuse for continuity.
Refer to "CHECKING THE FUSE" in chap-
ter 3.
• Is the main fuse OK?
YES
NO
Replace the fuse.
SIGNAL SYSTEM
EBS01044
2. Battery
• Check the condition of the battery.
Refer to "CHECKING AND CHARGING
THE BATTERY" in chapter 3.
Specific gravity
1.280 at 20 °C (68 °F)
• Is the battery OK?
EBS01041
3. Main switch
• Check the main switch for continuity.
Refer to "CHECKING THE SWITCHES".
• Is the main switch OK?
EBS01074
4. Wiring
• Check the entire signal system's wiring.
Refer to "CIRCUIT DIAGRAM".
• Is the signaling system's wiring properly
connected and without defects?
Check the condition
of each of the signal-
ing system's circuits.
Refer to "CHECK-
ING THE SIGNAL-
ING SYSTEM".
8 - 26
ELEC
YES
• Refill battery fluid.
• Clean the battery
terminals.
• Recharge or
replace the battery.
YES
Replace
the
switch.
YES
Properly connect or
repair the signaling
system's wiring.
–
+
NO
NO
main
NO
- Quick Links:
- Electrical
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
