Advertisement
Open the antistatic bag containing the SP CompactFlash adapter.
Step 5
Note
Carefully align the CompactFlash adapter edge connector with the DIMM socket. Slide the
Step 6
CompactFlash adapter edge connector at an angle into the socket. (See
Note
Step 7
Press down firmly on both edges of the CompactFlash adapter until the CompactFlash adapter latches
into place. Visually verify that both locking spring clips are fully engaged over the edges of the
CompactFlash adapter. (See
Figure 6
SP CompactFlash Adapter
You are now ready to reinstall the Supervisor Engine 720 into the switch chassis.
78-17277-05
The SP CompactFlash adapter has a label attached to the CompactFlash identifying it as the SP
CompactFlash adapter.
Make sure that the CompactFlash adapter edge connector is fully inserted into the DIMM socket.
Figure
Installing the CompactFlash Adapter
DIMM Socket
6.)
Cisco CompactFlash Adapter for Bootflash Upgrade Installation Note
Installing the SP Bootflash Memory Upgrade Kit
Figure
6.)
15
Advertisement
