Advertisement
Module Handling Guidelines
Figure 13
ESD ground
strap
Module Handling Guidelines
Follow these guidelines when handling modules:
•
•
•
Caution
For safety, periodically check the resistance value of the antistatic strap. The measurement should be
between 1 and 10 megohm (Mohm).
Cisco CompactFlash Adapter for Bootflash Upgrade Installation Note
26
Attaching the ESD Wrist Strap Clip to the System Ground Lug Screw
Slide clip
behind screw
Clip installed
behind screw
WS-X6 K-SUP 2-2GE
CONSOL E
PORT
MODE
CONSOL E
SUPER VISOR 2
PCMCIA
OSM-4OC 12 POS-SI
4 PORT OC-12 POS
SM IR
OSM-4OC 12 POS-SI
4 PORT OC-12 POS
SM IR
Handle carriers by available handles or edges only; avoid touching the printed circuit boards or
connectors.
Place a removed component board-side-up on an antistatic surface or in a static shielding container.
If you plan to return the component to the factory, immediately place it in a static shielding
container.
Never attempt to remove the printed circuit board from the metal carrier.
Clip
Grounding lug
Screw
Side view of
grounding lug
System ground
connector
Switch
Load
100%
PORT 1
PORT 2
EJECT
1%
78-17277-05
Advertisement
