hit counter script
Download
Share
Print this page
HP Vectra VL6 7 Installation Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. PCI Card
  5. Vectra VL6 7
  6. Installation manual
HP Vectra VL6 7 Installation Manual

HP Vectra VL6 7 Installation Manual

Fast etherlink xl tx pci network interface card (10/100bt)
Hide thumbs Also See for Vectra VL6 7:

Advertisement

Quick Links

Download this manual See also: Administrator's Manual, Online Manual
Fast Etherlink XL TX PCI Network
Interface Card (10/100BT)
3C905-TX
Installation Guide

Advertisement

loading

Related Manuals for HP Vectra VL6 7

Summary of Contents for HP Vectra VL6 7

  • Page 1 Fast Etherlink XL TX PCI Network Interface Card (10/100BT) 3C905-TX Installation Guide...
  • Page 2 Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. is a trademark of Intel Corporation. Pentium® is a registered trademark of Intel Corporation. Hewlett-Packard France Commercial Desktop Computing Division 38053 Grenoble Cedex 9 France © 1998 Hewlett Packard Company...
  • Page 3 • Boot PROM Disabled • Media Type Auto Select (N-Way) I/O Base Address Interrupt Request Procedure 1 With the HP Vectra turned off, install the 3COM Fast Etherlink 3C905 Connecting to a Netware 3.12 server Vectra VL8 Vectra VL7 FCC0h (PCI)
  • Page 4 Connecting to a Netware 3.12 server Windows for Workgroups adapter card into a PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt. 3 Insert the 3COM drivers diskette and execute 3C90XCFG.EXE. 4 Select “CONFIGURE NIC” and verify the resource settings listed above under the heading “Device Configuration.”...
  • Page 5 8 Accept the default installation options by pressing “F10.” 9 At the “Customize Support for Windows” screen, press “F10.” 10 Select 32-bit LAN Drivers and hit the enter key. 11 Page down the Board Drivers list to “USER SPECIFIED 32 BIT DRIVER LIST”...
  • Page 6 • 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1. • File Name: OEMSETUP.INF Size: 41KB Date: 3/14/97 • Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is located at C:\Masters\Win95\System\Cabs\) • Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX, •...
  • Page 7 If you are using a VL8, go straight to step 13. • In the "Copying Files…" window, the path should read "A:\Win95\" (If you have an HP pre-loaded HDD, set the path statement to "C:\MAS- TERS\LANDRV\3C905\Disk2\Win95\") • Click on "OK" to continue the installation.
  • Page 8 C:\Masters\Win95\System\Cabs\) 20 When prompted, insert the 3C905 driver’s disk 2 of 2 and click on “OK.” 21 Set the path to “A:\” and click on “OK.” (If you have an HP preloaded HDD, set the path statement to “C:\MASTERS\LANDRV\3C905\Disk2\”) 22 Click on “YES” to complete installation and restart the machine.
  • Page 9 • Boot PROM Disabled • Media Type Auto Select (N-Way) Vectra VL8 Vectra VL7 I/O Base Address FCC0h (PCI) FC40h (PCI) Interrupt 9 (PCI) 9 (PCI) Procedure 1 With the HP Vectra turned off, install the 3COM Fast Etherlink 3C905...
  • Page 10 Connecting to a Netware 4.1 server Windows for Workgroups adapter card into a PCI slot. 2 Power on the machine and allow it to boot to a DOS prompt. 3 Insert the 3COM drivers diskette and execute 3C90XCFG.EXE. 4 Select “CONFIGURE NIC” and verify the resource settings listed above under the heading “Device Configuration.”...
  • Page 11 8 Accept the default installation options by pressing “F10.” 9 At the “Customize Support for Windows” screen, press “F10.” 10 Select 32-bit LAN Drivers and hit the enter key. 11 Page down the Board Drivers list to “USER SPECIFIED 32 BIT DRIVER LIST”...
  • Page 12 • 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1. • File Name: OEMSETUP.INF Size: 41KB Date: 3/14/97 • Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is located at C:\Masters\Win95\System\Cabs\) • Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and •...
  • Page 13 Connecting to a Netware 4.1 server Windows 95 SR2 Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C905 adapter card into a PCI slot. 2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.
  • Page 14 C:\Masters\Win95\System\Cabs\) 20 When prompted, insert the 3C905 driver’s disk 2 of 2 and click on “OK.” 21 Set the path to “A:\” and click on “OK.” (If you have an HP preloaded HDD, set the path statement to “C:\MASTERS\LANDRV\3C905\Disk2\”) 22 Click on “YES” to complete installation and restart the machine.
  • Page 15 • I/O Base Address • Interrupt Request Level Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C905 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C905 card. 3 Power on the machine and set Plug and Play in CMOS to off.
  • Page 16 19 Specify your User Name , Workgroup, and Computer Name in “Microsoft Windows Network Names” dialog box, and click on “OK.” 20 Insert disk 2 and set “Install Driver” path to “A:\MSLANMAN.DOS\DRIVERS\ETHERNET\EL90X\” and click “OK” to complete file copying. (If you have an HP preloaded HDD, set the path to...
  • Page 17 C:\MASTERS\DRIVERS\LAN\3C905\DISK1\MSLANMAN.DOS\DRIVERS\ ETHERNET\EL90X) 21 Finish the network card installation by clicking on “OK” in the “Network Setup” message. 22 To complete the installation, click on the “Restart Computer” button in the “Windows Setup” dialog box. Connecting to a Windows NT Server 3.51 Windows for Workgroups Ver.
  • Page 18 I/O Base Address Interrupt Request Level Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C905 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C905 card. Connecting to a Windows NT Server 3.51...
  • Page 19 13 Insert Disk 2 of 2 of the 3Com drivers disks and click “OK” in the “Insert Disk” dialog box. 14 In “Copying Files…” dialog box , set path to “A:\” (If you have an HP pre- loaded HDD, set the path statement to “C:\MASTERS\LANDRV\3C905\DISK2\”).
  • Page 20 • Click on "OK" to the "Insert Disk" dialog box. • Set the path to "A:\" and click on "OK." (If you have an HP preloaded HDD, set the path to "C:\MASTERS\LAN\3C905\DISK1\") • Click on "Yes" to finish the Setup installation and restart your comput- er to the "System settings Change"...
  • Page 21 • Media Type I/O Base Address Interrupt Request Level Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C905 adapter card into a PCI slot. Connecting to a Windows NT Server 3.51 Normal Auto Select (N-WAY) Disabled...
  • Page 22 “Continue“. 16 Set the path to “A:\” in the “Insert Disk” dialog box, and then insert the 3COM 3C905 drivers disk 1. (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C905\disk1\) 17 Click “OK” at the “Install Driver” dialog box.
  • Page 23 20 Click on the “OK” button in the “3Com DRMON SmartAgent PC Software” dialog box. 21 Click on the “Close” button in the “3Com NIC Diagnostics v1.0” dialog box. 22 Choose the default protocol TCP/IP, and any additional network protocols by clicking the check boxes in the “Windows NT Setup” dialog box and click “Continue”.
  • Page 24 • Boot PROM • Media Type I/O Base Address Interrupt Request Level Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C905 PCI Connecting to a Windows NT Server 3.51 Normal Auto Select (N-WAY) Disabled Auto Select (N-WAY)
  • Page 25 Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 adapter card into a PCI slot. 2 Connect network media to the 3COM 3C905 PCI card. 3 Insert a DOS bootable diskette and power on the machine. 4 After booting, insert the 3COM Etherlink 3C905 Ethernet card and drivers Disk 1 ver 2.1.
  • Page 26 18 Accept the default Network Protocol TCP/IP and click on any additional protocols, then click “Next.” (If you do not have the required Protocols information, contact your network administrator.) 19 At the “Network Services:” prompt, accept default settings and click on “Next.”...
  • Page 27 c905.bk : ch_8.fb4 Page 4 Thursday, October 22, 1998 9:51 AM Connecting to a Windows NT Server 3.51 Windows NT Workstation 4.0 34 To complete the installation, select “Yes” to reboot your computer.
  • Page 28 • Media Type I/O Base Address Interrupt Request Level Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink III 3C905 adapter card into a PCI slot. Connecting to a Windows NT Server 4.0 Normal Auto Select (N-WAY)
  • Page 29 13 Type the path “A:\WFW311” in the “Install Driver” dialog box, and then insert the 3COM 3C905 drivers disk 1 of 2 into the floppy drive, and click “OK” on “Install Driver” dialog box. (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C905\Disk1\WFW311”) 14 Select “3Com Fast Etherlink XL / Etherlink XL Adapter (3C90X) ”...
  • Page 30 21 Insert disk 2 and set “Install Driver” path to “A:\MSLANMAN.DOS\DRIVERS\ETHERNET\EL90X\” and click “OK” to complete file copying. (If you have an HP preloaded HDD, set the path to C:\MASTERS\DRIVERS\LAN\3C905\DISK1\MSLANMAN.DOS\DRIVERS\ ETHERNET\EL90X) 22 Finish the network card installation by clicking on “OK” in the “Network Setup”...
  • Page 31 I/O Base Address Interrupt Request Level Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C905 adapter card into a PCI slot. 2 Connect network cable media to the 3COM 3C905 card. Connecting to a Windows NT Server 4.0...
  • Page 32 13 Insert Disk 2 of 2 of the 3Com drivers disks and click “OK” in the “Insert Disk” dialog box. 14 In “Copying Files…” dialog box , set path to “A:\” (If you have an HP pre- loaded HDD, set the path statement to “C:\MASTERS\LANDRV\3C905\DISK2\”).
  • Page 33 If you are using a Vectra VL7, finish the installation by following the instructions below. • Set the path to "A:\" and click on "OK." (If you have an HP preloaded HDD, set the path to "C:\MASTERS\LAN\3C905\DISK1\") • Click on "Yes" to finish the Setup installation and restart your comput- er to the "System settings Change"...
  • Page 34 • Media Type I/O Base Address Interrupt Request Level Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C905 adapter card into a PCI slot. Connecting to a Windows NT Server 4.0 Normal Auto Select (N-WAY) Disabled...
  • Page 35 “Continue“. 16 Set the path to “A:\” in the “Insert Disk” dialog box, and then insert the 3COM 3C905 drivers disk 1. (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C905\disk1\) 17 Click “OK” at the “Install Driver” dialog box.
  • Page 36 20 Click on the “OK” button in the “3Com DRMON SmartAgent PC Software” dialog box. 21 Click on the “Close” button in the “3Com NIC Diagnostics v1.0” dialog box. 22 Choose the default protocol TCP/IP, and any additional network protocols by clicking the check boxes in the “Windows NT Setup” dialog box and click “Continue”.
  • Page 37 • Boot PROM • Media Type I/O Base Address Interrupt Request Level Procedure 1 With the HP Vectra turned off, install the 3COM Etherlink 3C905 PCI Connecting to a Windows NT Server 4.0 Normal Auto Select (N-WAY) Disabled Auto Select (N-WAY)
  • Page 38 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 adapter card into a PCI slot. 2 Connect network media to the 3COM 3C905 PCI card. 3 Insert a DOS bootable diskette and power on the machine. 4 After booting, insert the 3COM Etherlink 3C905 Ethernet card and drivers Disk 1 ver 2.1.
  • Page 39 18 Accept the default Network Protocol TCP/IP and click on any additional protocols, then click “Next.” (If you do not have the required Protocols information, contact your network administrator.) 19 At the “Network Services:” prompt, accept default settings and click on “Next.”...
  • Page 40 c905.bk : ch_12.fb4 Page 4 Thursday, October 22, 1998 9:51 AM Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 34 To complete the installation, select “Yes” to reboot your computer.
  • Page 41 c905.bk : bcover.fb4 Page xxxvii Thursday, October 22, 1998 9:51 AM...
  • Page 42 c905.bk : bcover.fb4 Page xxxviii Thursday, October 22, 1998 9:51 AM Version Number 3COM 905 Rev.1...

This manual is also suitable for:

3c905-tx