Canon imageFORMULA DR-5010C Easy Start Manual
Hide thumbs
Also See for imageFORMULA DR-5010C:
- Startup manual (96 pages) ,
- Specification (4 pages) ,
- Specifications (4 pages)
Advertisement
Quick Links
Document Scanner DR-5010C
Easy Start Guide
Thank you for purchasing the Canon DR-5010C Document Scanner.
This Easy Start Guide describes the procedure for setting up the scanner for use. Follow the
procedures outlined in this Easy Start Guide to set up the scanner. Details on using the
scanner are described in the User's Guide packaged with the scanner. Before you start using
the scanner, make sure to thoroughly read the User's Guide.
Checking the Package Contents
When you unpack your scanner, make sure all of the following accessories are included.
If any of the items listed below are missing or damaged, contact your local authorized Canon
dealer or service representative.
Power Cord
DR-5010C Scanner
Document Eject Guide
Easy Start Guide
(This Manual)
The DR-5010C Setup Disc is
inserted in the User's Guide.
Adobe Acrobat
DR-5010C
Setup Disc
Setup Disc
0880281099-L5T1P7-BR01
C A N O N
C A N A D A
I N C .
M I S S I S S A U G A
6 3 9 0
D I X I E
R D
O N
L 5 T
9 Z 9
Warranty Card
Registration Card
(U.S.A and Canada only)
(U.S.A and Canada only)
Note
The DR-5010C Setup Disc contains the Softwares (DR-5010C Scanner Driver
and CapturePerfect3.0) and PDF manuals. For details, refer to "About the Setup
Disc" on page 16 of the User's Guide.
Items included in this package are subject to change without notice.
Keep the package and packing materials for storing or transporting the scanner.
After checking the package contents, you need to remove all the
packing materials protecting the scanner. (
Removing the Packing Materials
After unpacking the scanner, perform the following steps to remove all the orange
tape and protective materials from it.
1.
Peel off all the orange tape from the outer casing.
2.
Carefully open the document feed tray.
Document
Feed Tray
Trademarks
• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or
registered trademarks in other countries.
• Microsoft Windows
®
is a registered trademark of Microsoft USA in the United States and other countries.
• Other brands and product names used in this manual may be trademarks or registered trademarks of their respective
companies.
PUB. CE-IE-672
©2008 CANON ELECTRONICS INC.
3.
Peel off the orange tape from all the places marked
4.
Grab the edge of the upper unit as shown, and carefully open it until it stops.
Upper Unit
Warning
The protrusion in the middle of the upper unit holds the pickup roller. Do not
grab this protrusion when opening the upper unit, because it may damage the
pickup roller or cause feed errors.
5.
Remove the protective sheet and the packing materials securing the pickup
USB Cable
roller.
User's Guide
6.
Remove the roller cover, take out the packing materials securing the retard
roller, and then reinstall the roller cover.
Retard Roller
7.
Gently close the upper unit. Make sure it is closed securely by pushing on both
edges until you hear a click.
STEP2)
The scanner is now ready for use.
Next, you need to install the scanner software. (
Install the software before connecting the scanner to the computer.
Warning
Do not connect the scanner to the computer before installing the software.
In a Windows 2000/XP/Vista environment, if you connect the scanner and
turn it ON before you install the software, a wizard screen will appear.
If this wizard appears, click [Cancel] to exit the wizard, and then turn the
scanner OFF.
Wizard Screen (Windows 2000)
Close all other applications before installing the software.
below.
Pickup Roller
Pickup Roller
Roller Cover
STEP3)
Installing the Software
1.
Log on to Windows with an account that has
administrator privileges.
2.
Insert the DR-5010C Setup Disc into the
computer's CD-ROM drive.
The setup wizard automatically starts up when
you insert the CD-ROM into the CD-ROM
drive. If the setup wizard does not start up, run
the setup.exe application on the CD-ROM.
For Windows Vista
When using Windows Vista, the "User Account
Control" screen may appear. In this case, log
on as an administrator and click [OK].
3.
Click [Typical Installation].
[Typical Installation] installs all of the software.
If you want to select which parts of the
software to install, click [Custom Installation].
4.
Click [Install].
All of the currently displayed software is
installed. To install only selected software,
click [Back] and select [Custom Installation].
5.
Click [Next].
6.
Read the software license agreement, and
click [Yes] if you consent to its conditions.
Installation of the scanner driver starts.
7.
Click [Finish] to complete the installation.
Next, the installation wizard for CapturePerfect
3.0 appears.
8.
Click [Next].
9.
Read the software license agreement, and
click [Yes] if you consent to its conditions.
10.
Check the destination folder for the installation,
and click [Next].
Installation of CapturePerfect 3.0 starts.
11.
Click [Finish] to complete the installation of
CapturePerfect 3.0.
Continued on back side
Advertisement
Related Manuals for Canon imageFORMULA DR-5010C
Summary of Contents for Canon imageFORMULA DR-5010C
-
Page 1: Checking The Package Contents
Carefully open the document feed tray. Document Feed Tray Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • Microsoft Windows ®... -
Page 2: Connecting The Scanner To Your Pc
(Windows XP) (Windows Vista) The installation finished message does not appear in Windows 2000. The scanner is registered on the computer as “CANON DR-5010C USB” (or “CANON DR-5010C SCSI”) in the “Imaging Device” directory of the Device Manager. The scanner is now correctly recognized by your computer.