SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
areas for communal use in blocks of flats or in launderettes. – Do not exceed the maximum load of 8 kg (refer to the • "Programme chart" chapter). The operating water pressure at the water entry point from the • outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa).
ELECTRICAL CONNECTION • Make sure that there is access to the tap after the installation. WARNING! Risk of fire and electric shock. WARNING! Risk of injury, electric • The appliance must be earthed. shock, fire, burns or damage to the •...
PRODUCT DESCRIPTION APPLIANCE OVERVIEW Worktop Rating plate Detergent dispenser Drain pump filter Control panel Feet for levelling the appliance Door handle CHILD SAFETY DEVICE This device prevents children or pets to be closed in the drum. Turn the device clockwise, until the groove is horizontal. You cannot close the door.
• : the rinses phase When a programme is set, all the indicators of the phases related to the • : the washing phase programme come on. When the programme starts, only the indicator of the phase in operation flashes. When a phase is complete the indicator of the phase remains on.
Page 8
Maximum load Programme Programme description Reference Temperature range (Type of load and soil level) spin speed Easy Iron 4 kg Synthetic items requiring a gentle wash. Normal and 800 rpm light soil. 60°C - (Cold) Refresh 20 min 3 kg A very short cycle for cotton and synthetic items with 40°C - 30°C 1200 rpm...
Page 10
Approximate Energy con- Water con- Remaining programme Programmes Load (kg) sumption sumption (li- duration (mi- moisture (%) (kWh) tre) nutes) Wool/Handwash 30°C Standard cotton programmes Standard 60°C cot- 1,06 Standard 60°C cot- 0,64 Standard 40°C cot- 0,61 1) At the end of spin phase. 2) Not available for some models.
Page 11
• Do not set the Prewash option. PREWASH With this option you can add a prewash phase to a washing programme. Use this option for heavy soil. When you set this option the programme duration increases. The related indicator comes on. EXTRA RINSE ■...
BEFORE FIRST USE 1. Make sure that the electrical and water 4. Set and start a programme for cotton at the connections comply with the installation highest temperature without laundry. instructions. This removes all possible dirt from the drum and the 2.
The drain pump can operate for a short time at the beginning of the washing cycle. STARTING A PROGRAMME WITH THE DELAY START OPTION 1. Press the button Delay Start again and again until the display shows the delay you Measure out the fabric Carefully close the deter- want to set.
2. Turn the programme knob again to activate the • In the display three flashing zeros come on. appliance. Now, you can set a new washing • The indicator of the Start/Pause goes off. programme. • The door lock indicator goes off.
• Be careful with the curtains. Remove the hooks • To help the environment, do not use more than and put the curtains in a washing bag or the correct quantity of detergent. pillowcase. • Obey the instructions that you find on the on •...
DOOR SEAL Make sure that all washing powder residue is re- moved from the upper and lower part of the recess. Use a small brush to clean the recess. Close the drawer and run the rinse programme with- Regularly examine the seal and remove all objects out any clothes in the from the inner part.
Unscrew carefully the CAUTION! When refitting the filter, drain filter to drain out the ensure it is securely re-tightened so as water. to stop leaks and young children being When no more water able to remove it. comes out, remove the filter.
WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. TROUBLESHOOTING • - The appliance does not drain the water. WARNING! Refer to Safety chapters. •...
Page 19
Problem Possible solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the drain hose has no kinks or bends. • Make sure that the drain filter is not clogged. Clean the filter, if nec- essary.
PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION 1369/2017 Product Information Sheet Trade Mark ZANUSSI Model ZWF81243WE, PNC 914909184 Rated capacity in kg Energy efficiency class A+++ Energy consumption in kWh per year, based on 220 standard wash- ing cycles for cotton programmes at 60 °C and 40 °C at full and partial load, and the consumption of the low-power modes.
Spin-drying efficiency class on a scale from G (least efficient) to A (most efficient) Maximum spin speed in rpm 1151 Remaining moisture content in % The 'standard 60 °C cotton programme' and the 'standard 40 °C cotton programme' are the standard washing programmes to which the information in the label and the fiche relates, these programmes are suitable to clean normally soiled cotton laundry and they are the most efficient in terms of combined energy and water consumption.