Table of Contents
Advertisement
BEFORE USING THE APPLIANCE
WHEN FIRST SWITCHING ON
The timer must be set to manual operation
before the main fan oven can be operated. This
must be done whenever the appliance is
switched off at the wall or when there has been
a power failure. For instructions on how to set
the timer see page 11.
If the Fan oven indicator neon does not glow
when the oven temperature control is turned, it
is most likely that the timer is set for automatic
cooking.
The Top Oven and the Dual Grill are not
controlled by the electronic timer.
RATING PLATE
This is situated on the lower front frame of the
appliance upon opening the top cavity door.
Alternatively the rating plate may also be found
on the back or top of some models (where
applicable).
The appliance must be protected by a suitably
rated fuse or circuit breaker. The rating of the
appliance is given on the rating plate.
Do not remove the rating plate from the
appliance
as
this
may
invalidate
the
guarantee.
PREPARING TO USE YOUR
APPLIANCE
Wipe over the base of the ovens with a soft
cloth and hot soapy water and wash the grill
and oven furniture before use.
We suggest that you run the oven elements for
10 - 15 minutes at 220°C to burn off any
residue from their surfaces.
The procedure should be repeated with the grill
for approximately 5 - 10 minutes.
During this period an odour may be emitted, it is
therefore advisable to open a window for
ventilation.
IN FOR FAN ASSISTED
THE FAN SELECTOR BUTTON
The Top oven enables you to cook with the
OUT FOR CONVENTIONAL
oven fan in operation or by conventional
means. Push the Fan Selector button in for fan
assisted cooking. Push the button out for
conventional oven cooking. Refer to the
appropriate oven section for full instructions.
8
Advertisement
Table of Contents
