CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Page 3
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America 6600 Orangetho- rpe Ave. Buena Park, CA90622, U.S.A.
• Do not use force on switches, knobs, or cables. When you move the YST-MS35D, first turn off the power to the speakers, then disconnect the AC adaptor from the AC outlet and the cables from the connected devices.
They reproduce a clearer sound, with less noise and distortion, and never require a soundcard! The YST-MS35D includes three speaker components: a left satellite speaker, a right satellite speaker, and a sub- woofer.
Controls & Connectors Rear INPUT TO RIGHT SPEAKER INPUT INPUT (Subwoofer) 1 USB INPUT Use the included USB cable to connect this port to the USB port on the computer. 2 TO RIGHT SPEAKER Connect the 8-pin cable from the right satellite speaker to this connector.
Installing USB driver When connecting this unit and your computer with the USB cable and controlling this unit from the computer, you must install the following software on your com- puter. • USB driver software : Necessary for this unit to communicate with your computer ...
Installing the software Microsoft Windows 98/98SE or Windows Me Installing and checking the USB driver 1. Turn on your computer and, if it’s not running already, start Windows 98/98SE or Windows 2. Connect the power cord (or AC adaptor) to a suitable AC outlet.
Page 9
Make the following settings on your computer after the installation of the driver is finished. Setting of Audio and Audio CD [Windows 98/98SE only] • Terminate all the activated applications. • When using Windows 98SE, restart Windows, first. 1. Click the Windows “Start” button and select “Settings”, and then “Control Panel”.
Microsoft Windows 2000 Professional Installing and checking the USB driver 1. Turn on your computer and, if it’s not running already, start Windows 2000 Professional, and log in with Administrator. 2. Connect the power cord (or AC adaptor) to a suitable AC outlet.
Page 11
Make the following settings on your computer after the installation of the driver is finished. Setting of Audio and Audio CD 1. Click the Windows “Start” button and select “Settings”, and then “Control Panel”. 2. Double-click the “Sounds and Multimedia” icon.
You can input analog audio signals into Inputs 1 and 2 (3.5 mm stereo mini plug input jacks) on the rear of sub- woofer and use the YST-MS35D system like conventional multimedia speakers. (For example, you can connect the outputs from a soundcard.) Some games software does not support USB.
Refer to the chart below if this system does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the AC adaptor and contact your authorized YAMAHA dealer or service center. PROBLEM...
USB cable 1 (2 m) 8 pcs of non skid pads 1 set * Specifications subject to change without notice. Please contact an authorized Yamaha dealer for more information on this product or connections to your computer. Loosen Tighten Speaker stand...