hit counter script
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. Linksys WRT610N
  6. User manual

Cisco Linksys WRT610N User Manual page 11

Simultaneous dual-n band
Hide thumbs Also See for Linksys WRT610N:
Table of Contents

Advertisement

Chapter 3
Network Setup
The Network Setup section changes the settings on the
network connected to the Router's Ethernet ports. Wireless
Setup is performed through the Wireless tab.
Router Address
This presents both the Router's IP Address, Subnet Mask,
and URL Address as seen by your network. The default
Router IP address is 192.168.1.1 and URL address is
http://WRT610N.com.
Router IP Address
Network Address Server Settings (DHCP)
The settings allow you to configure the Router's Dynamic
Host Configuration Protocol (DHCP) server function. The
Router can be used as a DHCP server for your network. A
DHCP server automatically assigns an IP address to each
computer on your network. If you choose to enable the
Router's DHCP server option, make sure there is no other
DHCP server on your network.
Network Address Server Settings (DHCP)
DHCP Server
DHCP is enabled by factory default. If you
already have a DHCP server on your network, or you don't
want a DHCP server, then select Disabled (no other DHCP
features will be available).
Starting IP Address
Enter a value for the DHCP server
to start with when issuing IP addresses. Because the
Router's default IP address is 192.168.1.1, the Starting
IP Address must be 192.168.1.2 or greater, but smaller
than 192.168.1.253. The default Starting IP Address is
192.168.1.100.
Maximum Number of DHCP Users
number of PCs that you want the DHCP server to assign
IP addresses to. This number cannot be greater than 253.
The default is 50.
Simultaneous Dual-N Band Wireless Router
Enter the maximum
Advanced Configuration
Client Lease Time
The Client Lease Time is the amount
of time a network user will be allowed connection to the
Router with their current dynamic IP address. Enter the
amount of time, in minutes, that the user will be "leased"
this dynamic IP address. After the time is up, the user will
be automatically assigned a new dynamic IP address. The
default is 0 minutes, which means one day.
Static DNS (1-3)
The Domain Name System (DNS) is how
the Internet translates domain or website names into
Internet addresses or URLs. Your ISP will provide you with at
least one DNS Server IP Address. If you wish to use another,
enter that IP Address in one of these fields. You can enter up
to three DNS Server IP Addresses here. The Router will use
these for quicker access to functioning DNS servers.
WINS
The Windows Internet Naming Service (WINS)
manages each PC's interaction with the Internet. If you
use a WINS server, enter that server's IP Address here.
Otherwise, leave this blank.
DHCP Reservation
Click DHCP Reservation if you want
to assign a fixed local IP address to a MAC address.
DHCP Reservation
You will see a list of DHCP clients with the following
information: Client Name, Interface, IP Address, and MAC
Address. Click the Select checkbox to reserve a client's IP
address. Then click Add Clients.
If you want to manually assign an IP address, enter the
client's name in the Enter Client Name field. Enter the IP
address you want it to have in the Assign IP Address field.
Make sure the IP address is between the starting DHCP
server's IP address and maximum number of DHCP users
range. Enter its MAC Address in the To This MAC Address
field. Click Add.
A list of DHCP clients and their fixed local IP addresses will
be displayed at the bottom of the screen. If you want to
remove a client from this list, click Remove.
9

Advertisement

Table of Contents
loading

Related Manuals for Cisco Linksys WRT610N

Related Products for Cisco Linksys WRT610N

Table of Contents