Panasonic VL-SWD501UBX Quick Start Manual
Wireless video intercom system
Hide thumbs
Also See for VL-SWD501UBX:
- Operating instructions manual (52 pages) ,
- Quick start manual (2 pages)
Advertisement
Quick Links
Key Features
• Wireless Handset:
Check visitors on Wireless Monitor, respond promptly and talk from living room, kitchen, everywhere home and while you are doing something else. UP to 6 wireless
monitor connectable. Max wireless range is 100m with no obstacles. You can add on repeaters expand the range. UP to 2 DECT repeater connectable.
• Large Touch Panel:
The main monitor has a large, 5 inch wide screen that clearly shows each visitor's face. You can simply touch the screen to activate an approximate 2x zoom
horizontally and vertically.
• Electric Lock Release Support for Gate:
• Wide-Angle Camera:
Wide-angle lens covers approximately 170 degrees horizontally and 115 degrees vertically.
• SD Card Recording:
Automatically record video images of visitors to SD card. It will record up to 3,000 visitors (30 seconds per visitor). (The SD Memory Card is sold separately.)
• Wireless Sensor Cameras:
By installing the optional DECT Wireless Sensor Camera, you can use human (heat) and motion sensors to monitor locations that you are concerned about.
UP to 4 wireless sensor camera connectable.
Wiring Schematic Diagram
MAIN MONITOR
220-240 V AC
NP
NP
D
B
24 V DC
Connection device for option output (A contact)
• When using an optional lobby station, this terminal is used by the lobby station. (In this case, connection
devices for option output (A concatc) cannot be connected.)
POWER SUPPLY UNIT
NP: Non-polarised
Wire type and length
Wiring run
A
Main monitor – Doorphone
Main monitor – Power supply unit
B
2
Doorphone – Electric lock*
C
Main monitor – Connection device for
D
option output (A contact)*
2
Wireless sensor camera –
–
Power supply unit
Wireless sensor camera –
–
External sensor
Accessory Information
For the Sub Monitor:
AC adaptor × 2 (PNLV226BX [2 pin AC plug] / PNLV226E [3 pin AC plug]), Rechargeable batteries × 2, Charger × 1
For the Door Station:
<VL-V554BX> Mounting base × 1 & screw (3.8 mm x 20 mm) × 2, Screw (4 mm x 12 mm) × 4, Name plate × 2, Hex wrench × 1
<VL-V554UBX> Flush mounting box × 1, Screw (4 mm x 25 mm) × 4, Name plate × 2, Hex wrench × 1
For the Main Monitor Station:
Optional Accessories
Door Station
Wireless
(Doophone)
Monitor Station
(Sub monitor)
VL-V554BX
VL-V554UBX
VL-WD613BX
VL-SWD501BX/UBX
The gate or door lock can be easily and quickly released even from the second oor of the house.
DOORPHONE 1
(Optional lobby station can be connetcted.)
A
NP
C
NP
NP
Power
12 V AC/DC
supply
DOORPHONE 2
C
NP
Power
supply
12 V AC/DC
Wire type*
Diameter
φ 0.65 mm
22 AWG
φ 1.0 mm
18 AWG
φ 0.5 mm
CAT 5
φ 0.65 mm
22 AWG
φ 1.0 mm
18 AWG
φ 0.5 mm - φ 1.2 mm (24 AWG - 17 AWG)
φ 0.5 mm - φ 1.2 mm (24 AWG - 17 AWG)
φ 0.65 mm
22 AWG
φ 1.0 mm
18 AWG
φ 0.5 mm - φ 0.8mm (24 AWG - 20 AWG)
Power supply unit* (VL-PS241) × 1, Mounting bracket × 1, Cable binder × 1, Screw (4 mm x 16 mm) × 2
*Including AC cable × 2, Cable binder × 1, Screw (4 mm x 40 mm) × 2
Wireless Sensor Camera
VL-WD812BX
Wireless Video Intercom System
MAIN MONITOR STATION
Electric lock
Electric lock
1
Length (Max.)
100 m
130 m
50 m
10 m
20 m
According to specifi cation of connected device.
According to specifi cation of connected device.
50 m
100 m
According to specifi cation of connected device.
Must be no longer than 20 m.
DECT Repeater
Lobby Station
VL-FKD2BX
VL-V590BX
VL-V590CX
Up to 20 Main
monitors
connectable
LOBBY STATION
<Rear view>
NP
NP
<Rear view>
Electric lock
NP
Power
30 V AC/
supply
24 V DC
*1 Type: Single-pair cable with outer sheath (jacket) Conductor: Copper
solid
• A certifi ed power supply wiring has to be used with this equipment.
The relevant national installation and/or equipment regulations shall
be considered. A certifi ed power supply wiring not lighter than ordinary
polyvinyl chloride fl exible wiring according to IEC 60227 shall be used.
*2 When using an electric lock or a connection device for option output (A
contact), select a device that meets the following guidelines:
• Electric lock connection terminal (S1/S2):
- N/O dry closure contact
- 12 V AC/DC, less than 1 A
• Connection device for option output (A contact) terminal (OUT1/OUT2):
- 24 V AC/DC, less than 0.3 A (minimum contact: 5 V DC 1 mA)
Relative Product
Main Monitor
Station
(Main monitor)
VL-MWD501BX
Advertisement
Related Manuals for Panasonic VL-SWD501UBX
Summary of Contents for Panasonic VL-SWD501UBX
- Page 1 Wireless Video Intercom System VL-SWD501BX/UBX Key Features • Wireless Handset: Check visitors on Wireless Monitor, respond promptly and talk from living room, kitchen, everywhere home and while you are doing something else. UP to 6 wireless monitor connectable. Max wireless range is 100m with no obstacles. You can add on repeaters expand the range. UP to 2 DECT repeater connectable. •...
- Page 2 Model Composition VL-SWD501BX VL-MWD501BX x 1, VL-WD613BX x 1, VL-V554BX x 1 VL-SWD501UBX VL-MWD501BX x 1, VL-WD613BX x 1, VL-V554UBX x 1 Speci cations VL-V554BX (Surface mount) VL-MWD501BX VL-WD613BX VL-PS241 VL-V554UBX (Flush mount) Wireless Monitor Station (Sub monitor) Model number and name...