PORTÉGÉ M750
Docking port
Only the TOSHIBA Express Port Replicator can be used with this
computer. Do not attempt to use any other Port Replicator.
Keep foreign objects out of the docking port. A pin or similar object can
damage the computer's circuitry. A plastic shutter protects the
connector.
Memory module slot
HDD pack cover
screws
Hard disk drive
cover
Battery release latch
Battery lock
Battery pack
Ultra Slim Bay
Ultra Slim Bay latch
2-8
This port enables connection of an optional
TOSHIBA Express Port Replicator or a Slice
Expansion Battery described in Chapter 3,
Hardware, Utilities and
The slot B memory module is located here. The
memory module slot allows for the installation,
replacement and removal of additional memory
module.
Refer to the
Additional memory module
Chapter 3,
Hardware, Utilities and
The HDD pack cover screws are the screws that
hold the hard disk drive cover in place.
A Hard disk drive pack is contained under the
Hard disk drive cover. It can be removed and
reinstalled. For more information on how to
remove or reinstall the Hard disk drive pack,
please refer to the
in Chapter 3,
Hardware, Utilities and
Slide and hold this latch into its 'Unlock' position
in order to release the battery pack ready for
removal. For more detailed information on
removing the battery pack please refer to
Chapter 6,
Power and Power-Up
Slide the battery lock to release the battery pack
for removal.
The battery pack provides power to the computer
when the AC adaptor is not connected. For more
detailed information on the use and operation of
the battery pack please refer to Chapter 6,
and Power-Up
Modes.
Refer to the
Right side
details.
Slide the latch to release or secure the Ultra Slim
Bay latch.
Options.
Options.
HDD Kit (Serial-ATA)
Options.
Modes.
section in this chapter for
User's Manual
section in
section
Power