Page 1: User Guide
User Guide Personal Computer V G N - T T s e r i e s...
Page 2: Table Of Contents
Contents Before Use ...6 Notice ...7 Documentation ...8 Ergonomic Considerations ...12 Getting Started ...14 Locating Controls and Ports...15 About the Indicator Lights ...22 Connecting a Power Source ...23 Using the Battery Pack ...24 Shutting Down Your Computer Safely ...32 Using Your VAIO Computer ...33 Using the Keyboard ...34 Using the Touch Pad ...35 Using Special-function Buttons ...36...
Page 3 Using the Wireless LAN (WLAN) ...67 Using the Bluetooth Function ...74 Using Peripheral Devices...80 Using the Noise Canceling Headphones ...81 Connecting a Docking Station...87 Connecting External Speakers ...95 Connecting an External Display ...96 Selecting Display Modes...104 Using the Multiple Monitors Function ...105 Connecting an External Microphone ...107 Connecting a Universal Serial Bus (USB) Device...108 Connecting a Printer ...111...
Page 4 Upgrading Your VAIO Computer...151 Adding and Removing Memory...152 Precautions ...159 Handling the LCD Screen ...160 Using the Power Source ...161 Handling Your Computer ...162 Handling the Built-in MOTION EYE Camera...165 Handling Floppy Disks ...166 Handling Discs ...167 Using the Battery Pack ...168 Using Headphones ...169 Handling the Memory Stick ...170 Handling the Hard Disk ...171...
Page 5 Microphone ...207 Mouse ...208 Speakers ...209 Touch Pad...211 Keyboard...212 Floppy Disks ...213 Audio/Video...214 Memory Stick ...218 Peripherals ...219 Docking Station ...220 Support Options ...221 Sony Support Information ...221 Trademarks ...222...
Page 6: Before Use
Information in the supplied manuals including this User Guide is intended for users of the VAIO computers with the Microsoft 32-bit operating system. You may find differences in the information when your computer comes preinstalled with the 64-bit operating system. ® computer, and welcome to the on-screen User Guide. Sony has Before Use ®...
Page 7: Notice
In the manual, the ™ or ® marks are not specified. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement.
Page 8: Documentation
❑ Troubleshooting and Recovery Guide — Contains solutions to problems other than those you encounter during normal operation. ❑ Regulations, Guarantee, EULA and Service Support — Contains Sony guarantee conditions, safety / regulations, modem regulations, wireless LAN regulations, wireless WAN regulations, ®...
Page 9 ❑ Specifications — The online specifications describe the hardware and software configurations of your VAIO computer. To view the online specifications: Connect to the Internet. Go to the Sony online support web site at http://www.vaio-link.com. ✍ You may have a separate disc that includes documentation for the bundled accessories.
Page 10 Before Use Windows Help and Support Windows Help and Support is a comprehensive resource for practical advice, tutorials, and demonstrations to help you learn to use your computer. Use the search feature, index, or table of contents to view all Windows Help resources, including those on the Internet. To access Windows Help and Support, click Start and Help and Support.
Page 11 Before Use Further Sources ❑ Consult the help files included with the software you are using for detailed information on features and troubleshooting. ❑ Go to http://www.club-vaio.com to find online tutorials about your favorite VAIO software.
Page 12: Ergonomic Considerations
Ergonomic Considerations You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations for both stationary and portable environments: ❑ Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touch pad, or external mouse.
Page 13 ❑ Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display as well.
Page 14: Getting Started
Getting Started Getting Started This section describes how to get started with using your VAIO computer. ❑ Locating Controls and Ports (page 15) ❑ About the Indicator Lights (page 22) ❑ Connecting a Power Source (page 23) ❑ Using the Battery Pack (page 24) ❑...
Page 15: Locating Controls And Ports
Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages. The appearance of your computer may be different from those illustrated in this manual due to variations in specifications. It may also vary in some countries or areas.
Page 16 Media Access indicator (page 22) Memory Stick slot (page 54) WIRELESS indicator (page 22) Charge indicator (page 22) Hard disk drive /Optical disc drive indicator Built-in microphone (monaural) SD memory card slot (page 60) WIRELESS switch (page 67) Built-in speakers (stereo) Muting button (page 36) Volume control buttons...
Page 17 Getting Started Back Battery connector (page 24)
Page 18 Right Optical disc drive (page 40) Manual eject hole (page 197) Optical disc drive indicator (page 22) Substitute drive eject button (page 40) Monitor port (page 97) Power button/Power indicator (page 22) Getting Started...
Page 19 Left DC IN port (page 23) Air vents Security slot ExpressCard/34 slot (page 50) i.LINK 4-pin (S400) port (page 112) Hi-Speed USB (USB 2.0) ports (page 108) Microphone jack (page 107) Headphones jack (page 95), (page 81) Support high-/full-/low- speeds. The headphones jack in this shape is equipped on models with the noise canceling headphones supplied.
Page 20 Port cover Open the port cover to access the ports behind it. Push out the top edge of the port cover and gently pull the cover until it is completely out of the socket. Network (Ethernet) port (page 65) HDMI output port (page 97) Getting Started...
Page 21 Bottom Air vents Docking station connector (page 88) Memory module compartment cover (page 152) Getting Started...
Page 22: About The Indicator Lights
About the Indicator Lights Your computer is equipped with the following indicator lights: Indicator Functions Power 1 Illuminates in green when the computer is on, blinks slowly in orange while the computer is in Sleep mode, and turns off when the computer is off or in Hibernate mode. Illuminates while the battery pack is charging.
Page 23: Connecting A Power Source
Connecting a Power Source You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer. Using the AC Adapter ✍ Use only the supplied AC adapter for your computer. To use the AC adapter Plug one end of the power cord (1) into the AC adapter (3).
Page 24: Using The Battery Pack
Using the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery. Installing the Battery Pack To install the battery pack Turn off the computer and close the LCD screen lid. Slide the battery LOCK switch (1) inward. Getting Started...
Page 25 Slide the battery pack diagonally into the battery compartment until the projections (2) on either side of the battery compartment fit into the U-shaped cuts (3) on either side of the battery pack. Push the battery pack down into the compartment until it clicks into place. Slide the battery LOCK switch outward to secure the battery pack on the computer.
Page 26 When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet. Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this computer only functions with genuine Sony...
Page 27: Charging The Battery Pack
Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery. To charge the battery pack Install the battery pack. Connect the computer to a power source with the AC adapter. The charge indicator light turns on while the battery pack is charging.
Page 28 Getting Started ✍ Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the computer. If the battery charge level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack.
Page 29 Follow steps 1 and 2 in To enable the battery care function and the quick charge function above, click Advanced, and check detailed information. If the battery charge capacity is low, replace the battery pack with a new genuine Sony battery pack.
Page 30 Using the Battery Life Conserving Wallpaper You can conserve your battery life just by setting the specific wallpaper as your desktop background. To set the battery life conserving wallpaper Click Start, All Programs, and VAIO Control Center. Click Display and then Long Battery Life Wallpaper Setting. Click Set Long Battery Life Wallpaper.
Page 31: Removing The Battery Pack
Removing the Battery Pack You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack while the computer is in Sleep mode. To remove the battery pack Turn off the computer and close the LCD screen lid.
Page 32: Shutting Down Your Computer Safely
Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer Turn off any peripherals connected to the computer. Click Start, the arrow next to the Lock button, and then Shut Down. Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically.
Page 33: Using Your Vaio Computer
Using Your VAIO Computer Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer. ❑ Using the Keyboard (page 34) ❑ Using the Touch Pad (page 35) ❑ Using Special-function Buttons (page 36) ❑...
Page 34: Using The Keyboard
Using the Keyboard Your keyboard is very similar to a desktop computer keyboard, but has additional keys that perform model-specific tasks. The VAIO-Link web site (http://www.vaio-link.com) also contains glossary information to help you use the keyboard. Combinations and Functions with the Fn Key ✍...
Page 35: Using The Touch Pad
Using the Touch Pad You can point to, select, drag, and scroll objects on the screen using the touch pad. Action Description Point Slide your finger on the touch pad (1) to place the pointer (2) on an item or object. Click Press the left button (3) once.
Page 36: Using Special-Function Buttons
Using Special-function Buttons Your computer is equipped with special buttons to help you use specific functions of the computer. Special-function button % Muting button - 2 + Volume control buttons S1 button Z Drive eject button Functions Turns the volume on and off. Decrease (-) and increase (+) the volume.
Page 37: Using The Built-In Motion Eye Camera
Using the Built-in MOTION EYE Camera Your computer is equipped with a built-in MOTION EYE camera. The built-in MOTION EYE camera adds video functionality to instant messaging software and video editing software and enables you to capture still images and movies with the preinstalled image capture software. Turning on the computer activates the built-in MOTION EYE camera.
Page 38: To Capture A Still Image
Capturing Still Images To capture a still image Click Start, All Programs, ArcSoft WebCam Companion 2, and WebCam Companion 2 to launch the WebCam Companion 2. Click the Capture icon in the main window. Frame your subject in the viewfinder. Click the Capture button below the displayed image.
Page 39 Capturing Movies To capture a movie Click Start, All Programs, ArcSoft WebCam Companion 2, and WebCam Companion 2 to launch the WebCam Companion 2. Click the Record icon in the main window. Frame your subject in the viewfinder. Click the Record Video button below the displayed image to start movie recording. When finished, click the Record Video button once again to stop movie recording.
Page 40: Using The Optical Disc Drive
Using the Optical Disc Drive Your computer is equipped with a built-in optical disc drive. To insert a disc Turn on the computer. Press the drive eject button (1) to open the drive. The drive tray slides out. ✍ If the drive eject button does not work, try the substitute drive eject button on the optical disc drive. If the power supply to the optical disc drive is disabled by the VAIO Power Management, it will take a while to eject the drive tray.
Page 41 Using Your VAIO Computer Close the drive tray by pushing it in gently. Do not remove the optical disc when your computer is in a power saving mode (Sleep or Hibernate). Doing so may cause the computer to malfunction. ✍ If you use an external optical disc drive, connect the drive before you launch any preinstalled disc operation program.
Page 42: Reading And Writing Optical Discs
Using Your VAIO Computer Reading and Writing Optical Discs ™ Your computer plays and records CDs, DVDs, and Blu-ray Disc media, depending on the model you purchased. Check your specifications for the type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive supports.
Page 43 Video Music Extra DVD±RW/ ±R DL/RAM Blu-ray Disc Combo Blu-ray Disc P Supports writing data to DVD-R discs compliant with DVD-R for General Version 2.0/2.1. Supports writing data to DVD-RW discs compliant with DVD-RW Version 1.1/1.2. The DVD±RW/RAM disc drive on your computer does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with a removable cartridge. Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM Version 1.0 is not supported.
Page 44 When you buy pre-recorded or blank discs for use with your VAIO computer, be sure to read the notices on the disc package carefully to check both playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee the compatibility of VAIO optical disc drives with discs that are not compliant with the official "CD,"...
Page 45 Notes on writing data to a disc ❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive. ❑ Do not strike or shake your computer while the optical disc drive is writing data to a disc. ❑...
Page 46 ❑ Do not place your computer into either of the power saving modes while your computer is playing a disc. ❑ Region code indicators are labeled on the discs or packages to indicate in which region and on what type of player you can play the disc.
Page 47: Playing Cds
Playing CDs To play an audio CD Insert a disc into the optical disc drive. If nothing appears on the desktop, click Start, All Programs, and the desired CD software to play the CD. If the Audio CD window appears, click to select an option. Copying Files to CDs To copy files to a disc Insert a recordable disc into the optical disc drive.
Page 48: Playing Dvds
Playing DVDs To play a DVD Close all running software applications. Insert a DVD into the optical disc drive. If nothing appears on the desktop, click Start, All Programs, and the desired DVD software to play the DVD. For instructions on how to use the software, see the help file included with your DVD software. Copying Files to DVDs To copy files to a disc Connect the AC adapter to the computer.
Page 49 Playing Blu-ray Disc Media The Blu-ray Disc playback function is available on selected models only. See the online specifications to find out the type of your optical disc drive, and then Reading and Writing Optical Discs Video playback may be interrupted, depending on the type or bit rate of the video. To play a Blu-ray Disc media Close all running software applications.
Page 50: Using The Expresscard Module
Using Your VAIO Computer Using the ExpressCard Module Your computer is equipped with an ExpressCard/34 slot for transferring data among digital cameras, camcorders, music players, and other audio/video devices. This slot can only accommodate an ExpressCard/34 (34 mm wide) module Referred to as the ExpressCard slot and the ExpressCard module in this manual.
Page 51: Inserting An Expresscard Module
Inserting an ExpressCard Module Your computer is supplied with a slot protector in the ExpressCard slot. Remove the slot protector before you use the slot. Use care when inserting or removing the ExpressCard module from the slot. Do not force it in or out of the slot. ✍...
Page 52 Using Your VAIO Computer ✍ If the module does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction. Make sure you use the most recent software driver provided by the ExpressCard module manufacturer.
Page 53: Removing An Expresscard Module
Removing an ExpressCard Module Insert the ExpressCard slot protector to block any particles from entering the slot when not using an ExpressCard module. Before moving your computer, be sure to insert the ExpressCard slot protector into the slot. Follow the steps below to remove the ExpressCard module while your computer is on. If it is not removed properly, your system may not work properly.
Page 54: Using The Memory Stick
Using Your VAIO Computer Using the Memory Stick The Memory Stick is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable, it can be used for external data storage.
Page 55 For the latest information about the Memory Stick, visit the Memory Stick web site at http://www.memorystick.com/en/. Your computer has been tested and found compatible with Sony branded Memory Stick with capacity of up to 16 GB that are available as of September 2008.
Page 56: Inserting A Memory Stick
Inserting a Memory Stick To insert a Memory Stick Locate the Memory Stick slot. Hold the Memory Stick with the arrow facing upward and pointing toward the slot. Carefully slide the Memory Stick into the slot until it clicks into place. The Memory Stick is automatically detected by your system and the contents on the Memory Stick are displayed.
Page 57 To view the contents on the Memory Stick Click Start and Computer to open the Computer window. Double-click the Memory Stick icon to view the list of data files saved in the Memory Stick. To format a Memory Stick The Memory Stick has been formatted in the factory default setting and is ready for use. If you want to reformat the media with your computer, follow these steps.
Page 58 Click Start. Follow the on-screen instructions. It may take time to format the Memory Stick depending on the media type. Using Your VAIO Computer...
Page 59: Removing A Memory Stick
Removing a Memory Stick Do not remove the Memory Stick while the Media Access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to load, so make sure the indicator is unlit before removing the Memory Stick. To remove a Memory Stick Check that the Media Access indicator light is unlit.
Page 60: Using The Sd Memory Card
❑ SDHC memory card ❑ MultiMediaCard (MMC) For the latest information on compatible memory cards, see Sony Support Information support web site. Your computer has been tested and found compatible only with major memory cards available as of September 2008. However, not all memory cards that meet the same specifications as the compatible media are guaranteed of compatibility.
Page 61: Inserting An Sd Memory Card
Inserting an SD Memory Card To insert an SD memory card Locate the SD memory card slot. Hold the SD memory card with the arrow facing upward and pointing toward the slot. Carefully slide the SD memory card into the slot until it clicks into place. Do not force the card into the slot.
Page 62: Removing An Sd Memory Card
Removing an SD Memory Card Do not remove an SD memory card while the Media Access indicator light is lit. If you do, the card or its data may become damaged. To remove an SD memory card Check that the Media Access indicator light is unlit. Push in the SD memory card toward the computer and release.
Page 63: Using The Internet
Using the Internet Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for connecting your computer to the Internet. The following types of Internet connection services may be available from your ISP: ❑...
Page 64: To Connect A Telephone Cable
To connect a telephone cable The following procedure applies to models with a built-in modem only. Plug one end of the phone cable (1) into the modem port Plug the other end into the wall jack (2). ✍ Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX).
Page 65: Using The Network (Lan)
Using the Network (LAN) You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T type networks with an Ethernet network cable. Connect one end of a network cable (not supplied) to the network (Ethernet) port on the computer or the optional docking station and the other end to your network. For detailed settings and devices needed to connect to the network, ask your network administrator.
Page 66 Using Your VAIO Computer Do not plug a telephone cable into the network (Ethernet) port on your computer. If the network (Ethernet) port is connected to one of the telephone lines mentioned below, high electric current to the port may cause damage, overheating, or fire.
Page 67: Using The Wireless Lan (Wlan)
Using the Wireless LAN (WLAN) Using the Wireless LAN (WLAN), all your digital devices with the built-in WLAN function communicate freely with each other through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless (radio) connection.
Page 68 Using Your VAIO Computer The IEEE 802.11b/g standard is a wireless LAN standard, using the 2.4 GHz band. The IEEE 802.11g standard provides high-speed communications, faster than the IEEE 802.11b standard. The IEEE 802.11a standard is a wireless LAN standard, using the 5 GHz band. The IEEE 802.11n draft standard is a wireless LAN standard, using the 2.4 GHz or 5 GHz band.
Page 69: Communicating Without An Access Point (Ad-Hoc)
Using Your VAIO Computer Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a LAN is created only by wireless devices themselves, with no other central controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home.
Page 70 To communicate without an access point (ad-hoc) You cannot select the 5 GHz band, which is used for the IEEE 802.11a standard, on ad-hoc networks. The IEEE 802.11n draft standard, using the 2.4 GHz or 5 GHz band, is not available on ad-hoc networks. Turn on the WIRELESS switch.
Page 71: Communicating With An Access Point (Infrastructure)
Using Your VAIO Computer Communicating with an Access Point (Infrastructure) An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access point (not supplied). The access point bridges the wireless and wired LAN and acts as a central controller for the wireless LAN network.
Page 72 To connect to a wireless network Make sure an access point is set up. See the manual that came with your access point for more information. Turn on the WIRELESS switch. Click the button next to or above your desired wireless option(s) in the VAIO Smart Network window. Make sure the WIRELESS indicator light turns on.
Page 73: Stopping Wireless Lan Communications
Using Your VAIO Computer Stopping Wireless LAN Communications To stop wireless LAN communications Click the button next to or above the WLAN icon in the VAIO Smart Network window. Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss.
Page 74: Using The Bluetooth Function
Using the Bluetooth Function You can establish wireless communications between your computer and other Bluetooth devices such as another computer or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area. To start Bluetooth communications Turn on the WIRELESS switch.
Page 75 Notes on using the Bluetooth function ❑ The data transfer rate varies, depending on the following conditions: ❑ Obstacles, such as walls, located between devices ❑ Distance between devices ❑ Material used in walls ❑ Proximity to microwaves and cordless telephones ❑...
Page 76 ❑ The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous use of the Bluetooth function and wireless communication devices, however, may cause radio interference and result in reduced communication speeds and distances than the standard values.
Page 77 Bluetooth Security The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to communicate. With the authentication function, you can prevent any anonymous Bluetooth devices from accessing your computer. The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be determined for both devices to be registered.
Page 78: Communicating With Another Bluetooth Device
Using Your VAIO Computer Communicating with Another Bluetooth Device You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a mouse, or a digital camera without the use of any cables. To communicate with another Bluetooth device To communicate with another Bluetooth device, you first need to set up the Bluetooth function.
Page 79: Stopping Bluetooth Communications
Stopping Bluetooth Communications To stop Bluetooth communications Turn off the Bluetooth device that is communicating with your computer. Click the button next to or above the Bluetooth icon in the VAIO Smart Network window. Using Your VAIO Computer...
Page 80: Using Peripheral Devices
Using Peripheral Devices Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. ❑ Using the Noise Canceling Headphones (page 81) ❑ Connecting a Docking Station (page 87) ❑ Connecting External Speakers (page 95) ❑...
Page 81: Using The Noise Canceling Headphones
Using Peripheral Devices Using the Noise Canceling Headphones A pair of noise canceling headphones may be supplied with your computer depending on the model you purchased. The noise canceling headphones are equipped with a built-in microphone that catches ambient noise and outputs an antiphase sound to reduce the noise.
Page 82 Before You Use the Noise Canceling Headphones ❑ You can enable the noise canceling function only when the supplied noise canceling headphones are connected to the headphones jack that supports this function. ❑ The noise canceling function does not work on sound output with the following devices: ❑...
Page 83 ❑ The noise canceling function is to reduce low-frequency noise in the ambient environment but not high-frequency noise. Nor is it to implement a 100% noise-free audio environment. ❑ When the noise canceling function does not seem to be working, unplug the supplied noise canceling headphones completely and then plug them back again.
Page 84 Connecting the Noise Canceling Headphones To connect the noise canceling headphones Plug the headphones cable into the headphones jack i. icon appears on the taskbar to indicate that the noise canceling function is enabled and a balloon message pops up from the icon. Before plugging the headphones cable to the headphones jack, make sure that the embossed marking on the plug faces upward.
Page 85: Adjusting The Effect Of The Noise Canceling Function
Adjusting the Effect of the Noise Canceling Function The noise canceling headphones supplied with your computer is configured to yield the optimum effect by default. If you feel that the noise canceling function is not fully in effect, you may be able to adjust the effect with the Noise Canceling Control slider on the Noise Canceling Headphones window.
Page 86 What to do if the icon and the balloon do not appear When the noise canceling function icon ( the icon, change the noise canceling function settings. To display the balloon message and the icon Click Start and Control Panel. Click Hardware and Sound.
Page 87: Connecting A Docking Station
Connecting a Docking Station Attaching a docking station enables you to connect additional peripherals to your computer, such as a printer and an external display. A docking station is not supplied with your computer and is available as an optional accessory. Locating Ports on the Docking Station The docking station can be powered only through the AC adapter supplied with your computer.
Page 88: Attaching Your Computer To The Docking Station
Attaching Your Computer to the Docking Station Be sure to install the battery pack before attaching your computer to the docking station. To attach your computer to the docking station Use the AC adapter supplied with your computer. Do not move your computer while it is attached to the docking station. This may detach the docking station and cause damage to both units. The monitor port on your computer is not accessible when the computer is attached to the docking station.
Page 89 Using Peripheral Devices Remove the docking station connector cover from the bottom of the computer. You may find it difficult to remove the docking station connector cover, as it is tight in place on your computer. Do not exert extra pressure when removing the cover so as not to damage the computer or the docking station connector cover.
Page 90 Align the rear bottom corners of the computer with the guides on the docking station. Gently push down the computer until it clicks into place. Lift open the LCD screen lid and turn on the computer. Using Peripheral Devices...
Page 91: Disconnecting Your Computer From The Docking Station
Using Peripheral Devices Disconnecting Your Computer from the Docking Station Make sure that no devices connected to the docking station are in use before disconnecting your computer. Do not disconnect your computer from the docking station while the IN USE indicator light is lit. Disconnecting the computer while the IN USE indicator is lit may result in loss of unsaved data or a failure of the computer.
Page 92 To disconnect your computer from the docking station Press the UNDOCK button (1) and wait until the IN USE indicator light (2) turns off. ✍ If the IN USE indicator is unlit, you do not have to press the UNDOCK button. Pressing the UNDOCK button while your computer is in a power saving mode brings the computer to Normal mode first, and then initiates the disconnection process.
Page 93 Lift the computer off the docking station. Replace the docking station connector cover on the bottom of the computer. Using Peripheral Devices...
Page 94 Alternatively, you can disconnect the computer from the docking station as follows: Click Start, the arrow next to the Lock button, and Undock. Make sure that a message balloon appears and the IN USE indicator light turns off. Then lift the computer off the docking station.
Page 95: Connecting External Speakers
Connecting External Speakers You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer. To connect external speakers Plug the speaker cable (1) (not supplied) into the headphones jack (2) i. Plug the other end of the speaker cable to the external speaker (3). Turn down the volume of the speakers before you turn them on.
Page 96: Connecting An External Display
Connecting an External Display You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer display or a projector. Blu-ray Disc playback on a connected external display may be interrupted, depending on the type or bit rate of the video. You may be able to solve this problem by lowering the screen resolution of the display.
Page 97: Connecting A Computer Display
Connecting a Computer Display You can connect a computer display (monitor) either directly to your computer or via the optional docking station. To connect a computer display The monitor port on your computer is not accessible when the computer is attached to the docking station. Use the MONITOR port on the docking station for connecting a computer display.
Page 98 If you want to connect a TFT/DVI monitor, plug the display cable (2) (not supplied) to an HDMI to DVI-D adapter (3) (not supplied) and plug one end of the HDMI cable (4) (not supplied) to the HDMI to DVI-D adapter (3) and the other end to the HDMI output port (5) on the computer, or plug the display cable(2) (not supplied) into the DVI-D port on the docking station.
Page 99: Connecting A Multimedia Computer Display
Connecting a Multimedia Computer Display You can connect a multimedia computer display that includes built-in speakers and a microphone either directly to your computer or via the optional docking station. To connect a multimedia computer display The monitor port on your computer is not accessible when the computer is attached to the docking station. Use the MONITOR port on the docking station for connecting a multimedia computer display.
Page 100 Using Peripheral Devices...
Page 101: Connecting A Tv
Set up the TV configuration system. If a device driver other than the one provided by Sony is used, the image will not be displayed and the audio will not be heard. Always use the device driver provided by Sony for updates.
Page 102 ✍ See the manual that came with your TV for more information on installation and use. The HDMI cable carries both video and audio signals. Additionally, you can connect a high-quality home theater receiver or other surround sound decoder devices between your computer and TV using an HDMI connection.
Page 103: Connecting A Projector
Connecting a Projector You can connect a projector (for example, the Sony LCD projector) either directly to your computer or via the optional docking station. To connect a projector The monitor port on your computer is not accessible when the computer is attached to the docking station. Use the MONITOR port on the docking station for connecting a projector.
Page 104: Selecting Display Modes
Selecting Display Modes You can select which display to use as the primary monitor when an external display (desktop monitor, etc.) is connected to your computer. If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors Function (page 105) for more information.
Page 105: Using The Multiple Monitors Function
Using the Multiple Monitors Function The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have an external display connected to the monitor port, your computer screen and the external display can function as a single desktop.
Page 106 To use the Multiple Monitors function Right-click on the desktop and select Personalize. Click Display Settings. Follow the on-screen instructions to change the settings. ✍ You can also change the S1 button assignment to activate the Multiple Monitors function with the S1 button. To change the S1 button assignment, press and hold the button to display the window for changing the assignment.
Page 107: Connecting An External Microphone
Connecting an External Microphone If you need to use a sound input device (for example, to chat over the Internet), you need to plug in an external microphone (not supplied). To connect an external microphone Plug the microphone cable (1) into the microphone jack (2) m. ✍...
Page 108: Connecting A Universal Serial Bus (Usb) Device
Connecting a Universal Serial Bus (USB) Device To protect your computer and/or USB devices from damage, observe the following: ❑ When moving the computer with USB devices connected, avoid exposing the USB ports to shock or impact. ❑ Do not put the computer into a bag or carrying case when it has USB devices connected. Connecting a USB Mouse To connect a USB mouse Choose the USB port (1)
Page 109: Connecting A Usb Floppy Disk Drive
Connecting a USB Floppy Disk Drive You can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive Choose the USB port (1) you prefer to use. Plug the USB floppy disk drive cable (2) into the USB port. Your USB floppy disk drive (3) is now ready for use.
Page 110: Disconnecting A Usb Floppy Disk Drive
Disconnecting a USB floppy disk drive You can disconnect a USB floppy disk drive when your computer is on or off. Disconnecting the drive when the computer is in a power saving mode (Sleep or Hibernate) may cause the computer to malfunction. To disconnect a USB floppy disk drive ✍...
Page 111: Connecting A Printer
Connecting a Printer You can connect a Windows-compatible printer to your computer to print documents. Connecting a Printer Using the USB Port You can connect a USB printer compatible with your version of Windows to the computer. To connect a printer using the USB port Plug the power cord (1) of your printer into an AC outlet.
Page 112: Connecting An I.link Device
Connecting an i.LINK Device Notes on connecting i.LINK devices ❑ Your computer is equipped with an i.LINK port, which you can use to connect an i.LINK device, such as a digital video camcorder. ❑ The i.LINK port on your computer does not supply power to an external device. If the external device requires external power, be sure to connect it to a power source.
Page 113: Connecting A Digital Video Camcorder
On Sony digital video cameras, ports labeled DV Out, DV In/Out, or i.LINK are i.LINK-compatible. The Sony digital video camcorder shown here is an example. Your digital video camcorder may need to be connected differently. You cannot access the pictures stored on a Memory Stick when using an i.LINK connection.
Page 114: Customizing Your Vaio Computer
Customizing Your VAIO Computer This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities. ❑ Setting the Password (page 115) ❑...
Page 115: Setting The Password
Setting the Password In addition to the Windows password, you can use BIOS functions to set two types of passwords to protect your computer: the power-on password and the hard disk password Once you have set the power-on password, you will be prompted to enter the password after the VAIO logo appears to start your computer.
Page 116 Adding the Power-on Password The power-on password is provided to protect your computer from unauthorized access. There are two types of the power-on passwords: the machine password and the user password. The machine password is provided for users with administrative rights on the computer to change all the setup options in the BIOS setup screen, as well as to start the computer.
Page 117 To add the power-on password (machine password) Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 118 To add the power-on password (user password) Make sure you set the machine password before setting the user password. Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 119: Changing/Removing The Power-On Password
Changing/Removing the Power-on Password To change or remove the power-on password (machine password) Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 120 To change or remove the power-on password (user password) Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 121: Adding The Hard Disk Password
Adding the Hard Disk Password The hard disk password provides additional security for the data stored on your built-in storage device. If you enable the hard disk password, this adds an extra level of security. When adding the hard disk password, you must set both the master and user passwords. The master password is provided for users with administrative rights on the computer to reset the user password in the BIOS setup screen.
Page 122 To add the hard disk password Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 123 Changing/Removing the Hard Disk Password To change the hard disk password Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 124 To remove the hard disk password Turn on the computer. Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Page 125: Adding The Windows Password
Adding the Windows Password The Windows password comes in handy when you have to share a single computer with other people. By setting the Windows password, you can protect your user account from unauthorized access. Entry of the Windows password will be prompted after you select your user account. Be sure not to forget the password.
Page 126: Changing/Removing The Windows Password
Changing/Removing the Windows Password To change the Windows password Click Start and Control Panel. Click User Accounts and Family Safety or User Accounts. Click User Accounts. Click Change your password. In the Current password field, enter your current password. In the New password and Confirm new password fields, enter a new password. Click Change password.
Page 127: Using Fingerprint Authentication
Using Fingerprint Authentication Your computer may be equipped with a fingerprint sensor to provide you with additional convenience. A small horizontal bar located between the left and right touch pad buttons is the sensor of the fingerprint reader and will be referred to as the fingerprint sensor hereinafter.
Page 128: Precautions On Using Fingerprint Authentication
Sony assumes no liability for any problems and damages arising out of your use of or inability to use the fingerprint sensor. ❑ The fingerprint recognition rate depends on your operating conditions and varies among individuals as well.
Page 129: Registering A Fingerprint
Registering a Fingerprint To use the fingerprint authentication function, you must register your fingerprint(s) in your computer. ✍ Set the Windows password on your computer before registration. See Adding the Windows Password To register a fingerprint Up to 10 fingerprints can be registered for each user and up to 21 fingerprints can be registered for logging onto your system using the Power-on Security feature.
Page 130 If you have failed to register a fingerprint, follow these steps to try again. Place the top joint of your finger on the fingerprint sensor (1). Swipe your finger perpendicularly across the fingerprint sensor. Customizing Your VAIO Computer...
Page 131 Customizing Your VAIO Computer Place your fingertip flat in the center of the fingerprint sensor. Scan your fingerprint from the top joint of the finger to the fingertip. Keep your finger in contact with the fingerprint sensor while swiping. Fingerprint registration may fail if you move your finger too fast or too slow. Let the fingerprint sensor take about one second to scan your fingerprint. You may not be able to register and/or have your fingerprint(s) recognized if your finger is excessively dry or wet, wrinkled, injured, dirty, etc.
Page 132 Logging Onto Your System To use the fingerprint authentication function in place of password entry to log onto your system, you need to set the power- on, hard disk , and Windows passwords and configure your computer for fingerprint authentication. For setting the power-on, hard disk The hard disk password is not available on models with two built-in storage devices in RAID configuration.
Page 133: Using The Password Bank
Customizing Your VAIO Computer Using the Password Bank Once you have registered your user information (user accounts, passwords, etc.) for web sites in the Password Bank, you can substitute fingerprint authentication for entering information required to access the password-protected web sites. For detailed information, see the help file included with the Protector Suite QL.
Page 134: Erasing The Registered Fingerprints
Using Fingerprint Authentication with the TPM With the TPM data encryption feature, using fingerprint authentication can strengthen computer security. For instructions on how to use the TPM, see Using the Trusted Platform Module (TPM) To use fingerprint authentication with the TPM, your computer needs to be equipped with both a fingerprint sensor and the TPM.
Page 135: Using The Trusted Platform Module (Tpm)
Customizing Your VAIO Computer Using the Trusted Platform Module (TPM) The Trusted Platform Module (TPM) is embedded in selected models only and provides your computer with basic security functions. In combination with the TPM, you can encrypt and decrypt your data to strengthen computer security against inappropriate access.
Page 136 ❑ Although your computer is provided with the TPM security functions, these functions do not ensure complete protection of your data and hardware. Sony assumes no liability for any problems and damages arising out of your use of the functions.
Page 137: Important Notice
Important Notice ❑ Do not encrypt the files containing keys to be used for encryption and the folders that include such files. Encrypting the files in the folders containing basic user keys and others, using the Encrypting File System (EFS) will disable you to launch your TPM software and decrypt the encrypted data in the following cases: ❑...
Page 138 ❑ Do not encrypt any one of the following archive, backup, or token files. There will be no way to restore them if you carelessly encrypt them. Sony assumes no liability for any troubles and damages arising out of your careless encryption of the following files and folders including them.
Page 139 ❑ Do not encrypt any one of the following password reset token or secret files. There will be no way to reset the password if you carelessly encrypt them. Sony assumes no liability for any troubles and damages arising out of your careless encryption of the following files and folders including them.
Page 140 Configuring the TPM To use the embedded TPM, you need to: Enable the TPM in the BIOS setup screen. Install the Infineon TPM Professional Package. Initialize and configure the TPM. To enable the TPM in the BIOS setup screen Turn on your computer. Press the F2 key when the VAIO logo appears.
Page 141 See the on-screen documentation for detailed information. To open the documentation, click Start, All Programs, Infineon Security Platform Solution, and Help. The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liability for any defects arising out of your data maintenance and management.
Page 142: Setting Up Your Computer With The Vaio Control Center
Setting Up Your Computer with the VAIO Control Center The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior. To use the VAIO Control Center Click Start, All Programs, and VAIO Control Center. Select the desired control item and change the settings.
Page 143: Using The Power Saving Modes
Using the Power Saving Modes You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode, your computer has two distinct power saving modes: Sleep and Hibernate. When using battery power, you should be aware that the computer will automatically enter Hibernate mode if the remaining battery life becomes short, regardless of the power management setting you select.
Page 144: Using Sleep Mode
Using Sleep Mode Sleep mode turns off the LCD screen and places the storage device(s) and the CPU into a low power consumption mode. The orange power indicator light blinks slowly in this mode. If you do not intend to use your computer for a long period of time while it is disconnected from AC power, place the computer into Hibernate mode or turn it off.
Page 145: To Return To Normal Mode
To return to Normal mode ❑ Press any key. ❑ Press the power button on your computer. If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data. ✍...
Page 146: Using Hibernate Mode
Using Hibernate Mode In Hibernate mode, the state of the system is saved on the built-in storage device and power is turned off. Even when the battery runs out of power, no data will be lost. The power indicator light is unlit in this mode. ✍...
Page 147 To return to Normal mode Press the power button. The computer returns to its normal state. If you press and hold the power button for more than four seconds, your computer will turn off automatically. ✍ It takes more time to return to Normal mode from Hibernate mode than from Sleep mode. You can use the VAIO Control Center to configure your computer to return to Normal mode when you open the LCD screen lid.
Page 148: Managing Power With The Vaio Power Management
Managing Power with the VAIO Power Management Power management helps you set up power plans for running on AC or battery power to suit your requirements for power consumption. The VAIO Power Management is a software application developed exclusively for VAIO computers. With this software application, you can enhance the Windows power management functions to ensure better operation of your computer and longer battery life.
Page 149: Vaio Power Management Viewer
VAIO Power Management Viewer You can view performance with the power plan that was modified with the VAIO Power Management. To start the VAIO Power Management Viewer Click Start, All Programs, and VAIO Control Center. Click Power Management and VAIO Power Management Viewer. ✍...
Page 150: Protecting The Hard Disk
Protecting the Hard Disk If your computer is equipped with a built-in hard disk drive, then it has the VAIO HDD Protection utility preinstalled for customizing your settings for protecting your hard disk drive against shock hazards. You can select the sensitivity level of the built-in shock sensor to set the appropriate protection level.
Page 151: Upgrading Your Vaio Computer
Upgrading Your VAIO Computer Upgrading Your VAIO Computer Your VAIO computer and memory modules use high precision components and electronic connectors technology. To avoid invalidation of the warranty during your product warranty period, we recommend that: ❑ You should contact your dealer to install a new memory module. ❑...
Page 152: Adding And Removing Memory
Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the amount of memory by replacing the installed memory module. Before you upgrade your computer's memory, read the notes and procedures in the following pages. Notes on adding memory modules ❑...
Page 153 ❑ Use the special bag supplied with the memory module or wrap the module in aluminum foil to protect it from ESD. ❑ Introducing any liquids, foreign substances, or objects into the memory module slots or other internal components of your computer will result in damage to the computer and any repair costs will not be covered by the warranty.
Page 154: Removing And Installing A Memory Module
Removing and Installing a Memory Module To change or add a memory module Shut down the computer and disconnect all peripheral devices. Unplug the computer and remove the battery pack. Wait about an hour until the computer cools down. Unscrew the screw (indicated by the arrow below) on the bottom of the computer and remove the memory module compartment cover.
Page 155 Remove the currently installed memory module as follows: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). Remove the new memory module from its packaging.
Page 156 Upgrading Your VAIO Computer Slide the memory module into the memory module slot and push it in until it clicks into place. Do not touch any other components on the motherboard. If you want to install only one memory module, be sure to use the lower slot. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot.
Page 157 Upgrading Your VAIO Computer Replace the memory module compartment cover. 10 Tighten the screw on the bottom of the computer. 11 Reinstall the battery pack and turn on the computer.
Page 158: Viewing The Amount Of Memory
Viewing the Amount of Memory To view the amount of memory Turn on the computer. Click Start, All Programs, and VAIO Control Center. Click System Information and System Information. You can view the amount of system memory in the right pane. If the additional memory does not appear, repeat the installation procedure and restart the computer.
Page 159: Precautions
Precautions Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage. ❑ Handling the LCD Screen (page 160) ❑ Using the Power Source (page 161) ❑ Handling Your Computer (page 162) ❑ Handling the Built-in MOTION EYE Camera (page 165) ❑...
Page 160: Handling The Lcd Screen
❑ Do not change the LCD screen orientation setting in the Tablet PC Settings window even when there are change options available for selection, as this may make your computer unstable. Sony assumes no liability for any malfunctions arising from changes to the settings.
Page 161: Using The Power Source
❑ When the AC adapter is not used, unplug it from the AC outlet. ❑ Use the AC adapter supplied with your computer or genuine Sony products. Do not use any other AC adapter as it may cause a malfunction.
Page 162: Handling Your Computer
Handling Your Computer ❑ Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.
Page 163 ❑ Provide adequate air circulation to prevent internal overheating. Do not place your computer on porous surfaces such as rugs, blankets, couches, or beds, or near materials such as curtains or draperies that may block its air vents. ❑ Do not grasp the port cover to lift your computer. ❑...
Page 164 Precautions ❑ Make sure you disconnect the AC adapter and remove the battery pack before cleaning your computer. ❑ To avoid losing data when your computer is damaged, back up your data regularly.
Page 165: Handling The Built-In Motion Eye Camera
Handling the Built-in MOTION EYE Camera ❑ Do not touch the lens protection cover of the built-in MOTION EYE camera, as it may cause scratches on the cover and such scratches will appear on the captured images. ❑ Do not let the direct sunlight get into the lens of the built-in MOTION EYE camera regardless of your computer's power state, as it may cause the camera to malfunction.
Page 166: Handling Floppy Disks
Handling Floppy Disks ❑ Do not open the shutter manually and touch the internal components of the floppy disk. ❑ Keep floppy disks away from magnets. ❑ Keep floppy disks away from direct sunlight and other sources of heat. ❑ Keep floppy disks away from any liquid. Do not let them get wet. When you are not using your floppy disk, always remove it from the floppy disk drive and put it in a storage case.
Page 167: Handling Discs
Handling Discs ❑ Do not touch the surface of the disc. ❑ Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole, as shown below: ❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc.
Page 168: Using The Battery Pack
❑ Charge battery packs at temperatures between 10°C to 30°C. Lower temperatures require longer charging time. ❑ Certain rechargeable battery packs do not meet Sony quality and safety standards. For safety reasons this computer only functions with genuine Sony battery packs designed for this model. If an unauthorized battery pack is installed, the battery pack will not be charged and the computer will not function.
Page 169: Using Headphones
Using Headphones ❑ Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings.
Page 170: Handling The Memory Stick
Handling the Memory Stick ❑ Do not touch the Memory Stick connector with your finger or metallic objects. ❑ Use only the adhesive label supplied with the Memory Stick as a label. ❑ Do not bend, drop, or expose the Memory Stick. ❑...
Page 171: Handling The Hard Disk
Handling the Hard Disk The following precautions apply to models with a built-in hard disk drive. See the online specifications to find out whether your model is equipped with the hard disk drive. The hard disk drive has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock, or dust.
Page 172: Updating Your Computer
Updating Your Computer Be sure to install the latest updates on your computer with the following software applications so that the computer can run more efficiently. ❑ Windows Update Click Start, All Programs, and Windows Update and then follow the on-screen instructions. ❑...
Page 173: Troubleshooting
Troubleshooting Troubleshooting This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. Try these suggestions before contacting VAIO-Link. ❑ Computer (page 175) ❑ System Security (page 183) ❑ Battery (page 184) ❑...
Page 174 Troubleshooting ❑ Peripherals (page 219) ❑ Docking Station (page 220)
Page 175: Computer
❑ Condensation may cause your computer to malfunction. If this occurs, do not use the computer for at least one hour. ❑ Check that you are using the supplied Sony AC adapter. For your safety, use only the genuine Sony rechargeable battery pack and AC adapter, which are supplied by Sony for your VAIO computer.
Page 176: What Should I Do If The Green Power Indicator Light Turns On But My Screen Remains Blank
What should I do if the green power indicator light turns on but my screen remains blank? ❑ Press the Alt+F4 keys several times to close the application window. An application error may have occurred. ❑ Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart. ❑...
Page 177: Why Doesn't My Computer Enter Sleep Or Hibernate Mode
Why doesn't my computer enter Sleep or Hibernate mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep or Hibernate mode. To restore your computer to Normal mode Close all open programs. Click Start, the arrow next to the Lock button, and Restart.
Page 178 What should I do if a message appears notifying of either incompatibility or the improper installation of the battery pack and my computer then enters Hibernate mode? ❑ This problem could be due to the battery pack not being installed properly. To resolve this problem, turn off your computer and remove the battery pack.
Page 179: How Can I Change The Boot Device Order
What should I do if my game software does not work or it keeps crashing? ❑ Check the web site of the game if there are any patches or updates to download. ❑ Make sure you have installed the latest video driver. ❑...
Page 180 Troubleshooting Why doesn't my screen turn off after the automatic turn-off time has passed? The VAIO original screen saver disables the timer setting, which you can select using the Windows power options, for your screen to turn off. Select a screen saver other than the VAIO original screen saver. What should I do if I cannot boot my computer from the external device connected to the computer? To boot your computer from the external device, for example the USB floppy disk drive and the USB/i.LINK optical disc drive,...
Page 181: How Do I Reduce The Volume Of The Recovery Partition
How do I reduce the volume of the recovery partition? Your built-in storage device* contains the recovery partition where data for the system recovery is stored. If your computer includes a built-in flash memory storage drive, you might want to reduce the volume of the recovery partition by following these steps: See the online specifications to find out about your storage device configuration.
Page 182 How do I check the volume of the recovery partition? Your built-in storage device contains the recovery partition where data for the system recovery is stored. To check the volume of the recovery partition, follow these steps: Click Start, right-click Computer, and select Manage. Click Disk Management under Storage in the left pane.
Page 183: System Security
System Security How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly. You can get important Windows updates by doing the following: Your computer must be connected to the Internet to download the updates.
Page 184: Battery
Troubleshooting Battery How do I find the battery charging status? You can check the battery charging status by the charge indicator. See Charging the Battery Pack (page 27) for more information. When is my computer using AC power? When your computer is directly connected to the AC adapter, it uses AC power, even if the battery pack is installed. When should I recharge the battery pack? ❑...
Page 185: Can My Computer Enter Hibernate Mode While Using Battery Power
Troubleshooting Should I be concerned that the installed battery pack is warm? No, it is normal for the battery pack to be warm when it is powering your computer. Can my computer enter Hibernate mode while using battery power? Your computer can enter Hibernate mode while using battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode.
Page 186: Built-In Motion Eye Camera
Built-in MOTION EYE Camera Why does the viewer window show no images or poor-quality images? ❑ The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the application before using the built-in MOTION EYE camera. ❑...
Page 187 Troubleshooting Why does movie playback show dropped frames when my computer is running on the battery? The battery pack is running out of power. Connect your computer to an AC power source. Why do the images captured by the built-in MOTION EYE camera flicker? This problem occurs when you use the camera under fluorescent lights due to the mismatch between lighting output frequency and shutter speed.
Page 188: Networking
Networking What should I do if my computer cannot connect to a wireless LAN access point? ❑ Connection capability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. ❑...
Page 189 ❑ Make sure the encryption key is correct. ❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. To change the settings, follow these steps: Right-click the power status icon on the taskbar and select Power Options.
Page 190: What Should I Do If I Cannot Access The Internet
What should I do if I cannot access the Internet? ❑ Check the access point settings. See the manual that came with your access point for more information. ❑ Make sure your computer and the access point are connected to one another. ❑...
Page 191: How Do I Avoid Data Transfer Interruptions
❑ Wireless LAN communication uses divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. ❑ If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your access point.
Page 192 How do I display the VAIO Smart Network window? To display the VAIO Smart Network window on the desktop, follow these steps: Click Start, All Programs, and VAIO Control Center. Click Network Connections and VAIO Smart Network. Click Advanced in the right pane. ✍...
Page 193: Bluetooth Technology
Bluetooth Technology What should I do if other Bluetooth devices cannot find my computer? ❑ Make sure both devices have the Bluetooth function enabled. ❑ If the WIRELESS indicator light is unlit, turn on the WIRELESS switch. ❑ You cannot use the Bluetooth function when your computer is in a power saving mode. Bring the computer back to Normal mode, then turn on the WIRELESS switch.
Page 194 What should I do if other Bluetooth devices cannot connect to my computer? ❑ Make sure the other devices are authenticated. ❑ To allow other Bluetooth devices to communicate with your computer, follow these steps: Click Start, Control Panel, Hardware and Sound, Bluetooth Devices, and Bluetooth Settings. Click the Options tab and select the Allow Bluetooth devices to find this computer check box.
Page 195: Why Is My Bluetooth Connection Slow
Why is my Bluetooth connection slow? ❑ The data transfer speed depends on the obstructions and/or the distance between the two devices, on the radio wave quality, and on the operating system or the software in use. Move your computer and Bluetooth devices closer to each other.
Page 196 Troubleshooting Why can't I use the Bluetooth function when I log onto my computer as a user with a standard user account? The Bluetooth function may not be available to a user with a standard user account on your computer. Log onto the computer as a user with administrative rights.
Page 197: Optical Discs
Optical Discs Why does my computer freeze when I try to read a disc? The disc that your computer is trying to read may be dirty or damaged. Follow these steps: Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer. Remove the disc from the optical disc drive.
Page 198 What should I do if I cannot play a disc properly on my computer? ❑ Make sure the disc is inserted into the optical disc drive with the label facing upward. ❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions. ❑...
Page 199 ❑ Make sure the correct driver software is installed. Follow these steps: Click Start and Control Panel. Click System and Maintenance. Click System. Click Device Manager in the left pane. The Device Manager window appears with a listing of your computer's hardware devices. If an "X"...
Page 200 What should I do if I cannot play Blu-ray Disc media or my computer becomes unstable during Blu-ray Disc playback? This Q & A entry applies to selected models only. See the online specifications to find out the type of your optical disc drive, and then Reading and Writing Optical Discs (page 42) to find out about the supported disc media.
Page 201: Why Can't I Write Data To Blu-Ray Disc Media
Why can't I write data to Blu-ray Disc media? This Q & A entry applies to selected models only. See the online specifications to find out the type of your optical disc drive, and then Reading and Writing Optical Discs (page 42) to find out about the supported disc media.
Page 202: Display
Display Why did my screen go blank? ❑ Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If the computer is in LCD (Video) Sleep mode, press any key to bring the computer back into Normal mode. See Using the Power Saving Modes (page 143) ❑...
Page 203: Why Doesn't My Screen Display A Video
Why doesn't my screen display a video? ❑ If the display output is directed to the external display and the external display is disconnected, you cannot display a video on your computer screen. Stop video playback, change the display output to the computer screen, and then restart video playback.
Page 204: What Should I Do If The External Display Remains Blank
What should I do if the LCD brightness of my screen changes? ❑ The LCD brightness setting, adjusted with the Fn+F5/F6 keys, is temporary and may be restored to the original setting when your computer returns to Normal mode from Sleep or Hibernate mode. To save your preference for the brightness, follow these steps: Right-click the power status icon on the taskbar and select Power Options.
Page 205: How Do I Run Windows Aero
How do I run Windows Aero? This Q & A entry applies to selected models only. To run Windows Aero, follow these steps: Click Start and Control Panel. Click Customize colors under Appearance and Personalization. Click Open classic appearance properties for more color options. Select Windows Aero from the Color scheme options on the Appearance tab.
Page 206: Printing
Printing What should I do if I cannot print a document? ❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and your computer. ❑ Make sure your printer is compatible with the Windows operating system installed on your computer. ❑...
Page 207: Microphone
Microphone What should I do if my microphone does not work? ❑ If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the microphone jack on your computer. ❑ Your sound input device may have been incorrectly configured. To configure the sound input device, follow these steps: Close all open programs.
Page 208: Mouse
Mouse What should I do if my computer does not recognize my mouse? ❑ Make sure your mouse is securely plugged into the port. ❑ Restart your computer with your mouse connected. What should I do if the pointer does not move when I use my mouse? ❑...
Page 209: Speakers
Speakers What should I do if my external speakers do not work? ❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. ❑...
Page 210 What should I do if I do not hear sound from the built-in speakers? ❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. ❑...
Page 211: Touch Pad
Touch Pad What should I do if the touch pad does not work? ❑ You may have disabled the touch pad before connecting a mouse to your computer. See Using the Touch Pad ❑ Make sure that a mouse is not connected to your computer. ❑...
Page 212: Keyboard
Keyboard What should I do if the keyboard configuration is wrong? The language layout of your computer's keyboard is labeled on the packaging box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. To change the keyboard configuration, follow these steps: Click Start and Control Panel.
Page 213: Floppy Disks
Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: Close all programs that are accessing the floppy disk drive.
Page 214: Audio/Video
✍ i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK connection may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK connection can communicate with each other.
Page 215 ✍ i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK connection may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK connection can communicate with each other.
Page 216 What should I do if I do not hear the sound from the sound output device connected to the HDMI output port, optical output port, or headphones jack? ❑ You need to change the sound output device if you want to hear sound from the device connected to a port, such as the HDMI output port, optical output port, or headphones jack.
Page 217 How do I output the Dolby Digital or DTS sound through an HDMI-compatible device? To output the Dolby Digital or DTS sound from a disc through an HDMI-compatible device connected to your computer, follow these steps: Click Start and Control Panel. Click Hardware and Sound.
Page 218: Memory Stick
Use of recorded music requires permission from the copyright holders. Sony is not responsible for music files that cannot be recorded from a CD or downloaded from other sources. Can I copy images from a digital camera using a Memory Stick? Yes, and you can view video clips that you have recorded with Memory Stick-compatible digital cameras.
Page 219: Peripherals
Peripherals What should I do if I cannot connect a USB device? ❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to the AC outlet.
Page 220: Docking Station
Docking Station What should I do if an error message appears when I disconnect my computer from the docking station? ❑ When any device inserted or connected to the docking station is in use, you cannot disconnect your computer from the docking station.
Page 221: Support Options
Go to http://www.vaio-link.com. ❑ VAIO-Link help lines: Before contacting VAIO-Link by telephone, try to solve the problem by reading the printed and non- printed documentation. ❑ Visit the other Sony web sites: ❑ http://www.club-vaio.com if you want to know more about VAIO and become part of the growing VAIO community.
Page 222: Trademarks
Microsoft Windows Vista, the Windows logo, and BitLocker are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. Roxio Easy Media Creator is a trademark of Sonic Solutions.
Page 223 Trademarks The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. SD Logo is a trademark.

This manual is also suitable for:

Vaio vgn-tt series

Sony VGN-TT21JN/B User Manual

Quick Links

User Guide

Related Manuals for Sony VGN-TT21JN/B

Summary of Contents for Sony VGN-TT21JN/B

This manual is also suitable for:

Table of Contents