Table of Contents
Advertisement
(Continued from previous page)
Pro:Centric Application Mode Configuration
Select/highlight the Mode field and and press OK on the Installer Remote to display the
drop-down list of options. Then, use the Up/Down arrow keys to select the appropriate
Pro:Centric Application Mode setting—Configuration Only, FLASH, GEM, or HTML. If the
Pro:Centric Application Mode is set to "Configuration Only," Pro:Centric application data will
not be downloaded.
Note: If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in the
EZ-Manager Wizard, the specified mode will be reflected in this field. If you change the mode in
this menu, Installer Menu item 098 will now reflect the value you selected here.
3. Select/specify the appropriate Update Event setting(s), as required. Based on Update Time
settings, the Wake For Update feature wakes the STB once daily to check for, and if applicable,
download updates from the Pro:Centric server. See Installer Menu item 121 UPDATE TIME HR
description on page 39 for additional information on Wake For Update functionality.
• To toggle between ON and OFF in this menu, select/highlight the Update Event field and
press OK on the Installer Remote. When Update Event is set to "ON," an Update Time field
is displayed on the screen.
• If Update Event is ON, set the Update Time as required. Use the arrow keys on the Installer
Remote to select/highlight the Update Time field, and then press OK. Hour, Minute, and
Meridiem fields will be displayed. Select each field in turn and specify the appropriate Wake
For Update time, as desired. Note that the Update Time set in this menu is based on a 12-hour
clock. Ensure the meridiem (AM/PM) specification is set accordingly.
4. Once all fields are completed as required, use the arrow keys on the Installer Remote to return to
the IP Environment Menu, as necessary, or press
Network Configuration
This section describes each of the options available in the Network
Menu (see example at right). Refer to the appropriate subsection(s)
on the following pages.
Note: If you intend to use the Wi-Fi Zoning feature with
cloning configuration, you must configure the wireless
network connection as part of the Master STB Setup.
See "Configuring a Wi-Fi Network Connection" on page
59 for further information.
Accessing the Network Menu
With the IP Environment Menu on display, use the arrow keys on
the Installer Remote to select the Network menu option. Then,
press OK.
Note: The STB's MAC address is displayed at the top of the Network
Menu screen and cannot be modified.
206-4272
IP Environment Setup (Cont.)
to exit the IP Environment Menu.
NETWORK
Pro:Centric
Network
MAC Address
Network Setting
Pre-loaded Apps
IP Stream Control
Wake On LAN
Media Share
AA:45:F7:52:F8:0F
57
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
