Table of Contents
Advertisement
Installation options
On base cabinet with door
When constructing the cabinet, suitable precautions must
be taken to prevent contact with the casing of the hob,
which becomes very hot during operation.The
recommended method for overcoming this problem is
illustrated in fig. 1.
The panel underneath the hob must be easily removable
to allow the hob to be locked in position and released in
case of servicing work.
On base cabinet with oven
The installation compart-
ment must have the di-
mensions shown in figu-
res 2 and 3 and must
have supports to allow
satisfactory ventila-
t i o n . Tw o
p o s s i b l e
methods for avoiding
overheating are illustra-
ted in figures 3 and 4.
The electrical connec-
tions of the hob and
oven must be made se-
parately both for electri-
cal reasons and to sim-
plify removal of the oven
through the front of the
cabinet.
Wall cabinets or ex-
tractor hoods must be at
least 650 mm above the
hob, subject to the ma-
nufacturer's instructions.
18
60
a Removable panel
b) Space for connections
550 min
Fig. 2
Fig. 3
2
50 cm
2
360 cm
a
b
Fig. 1
480
380
140
Fig. 3
Fig. 4
120cm
2
2
180 cm
Advertisement
Table of Contents
