Table of Contents
Advertisement
Building into fitted kitchen units
These hobs are designed for installation in fitted kitchen units up to 600 mm deep
with suitable characteristics.
Any cabinet side panels taller than the height of the hob itself must be at least 150
mm away from the opening into which the hob is inserted.
The dimensions of the hob and the installation opening are shown in the illustration.
Insertion and fixing
Before inserting the hob in the installation
opening, place the special gasket around
the bottom edge of the hob.
It is important to fix this gasket evenly, without
gaps or overlapping, to prevent liquid from
seeping underneath the hob.
1) Remove the pan stands and the burner
caps and turn the hob upside down, taking
care not to damage the ignition plugs and
the thermocouples.
2) Place the gasket around the bottom edge
of the hob as shown in the illustration on
the right.
3) Place the hob in the installation opening
and push it down so that the hob is resting
firmly on the cabinet, as shown in the
illustration.The side springs will hold it in
place.
A) gasket
a
17
Advertisement
Table of Contents
