Table of contents Contents For the user Congratulations from AEG ... 2 Safety information ... 4 Description of the product ... 5 Operating instructions ... 6 Operating grill ... 6 Hints for using the glass ceramic grill ... 7 Cleaning and maintenance of ... 8 Panel ...
Repairs must only be carried out by a qualified/competent person. Contact your local AEG Service Force Centre. Disposal Make the appliance unusable by cutting off the cable. Dispose of any packaging material and old appliances at an authorised disposal site.
Hints on the glass ceramic grill Ceramic glass is insensitive to temperature shock and very robust, however it is not unbreakable. Hard and sharp objects, in particular, can damage the cooking surface if they fall on it. Warning If visible cracks appear in the surface, the appliance must be disconnected from the mains immediately.
Cleaning and maintenance of For reasons of hygiene and safety, the griddle must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. Splashguard The splashguard can be removed to make it easier to clean the surface. What to do: 1.
Stainless steel surfaces Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid scouring cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis.
Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation The appliance unit can be mounted in any type of kitchen with a work top whose thickness is between 28 mm and 40 mm.
Page 11
It is not necessary to attach the reinforcement beam to the work top surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges. The units externally measured length 145 mm: Cooker hood 290 mm: Two-zone ceramic-top electric hob...
Installation The electrical connection may only be performed by a qualified electrician/ competent person. The electrical connection must be carried out in accordance with prevailing regulations for appliances using heavy current. The connection must comply with any specific requirements specified by the local electricity supply authority.
Mains Voltage 230 V Electrical connection 230V - 50Hz Total wattage 1500W This unit is labelled to indicate conformity with the lowvoltage directive (73/23/EEC) and the EMC directive (89/336/EEC). Check that the hobs has no faults and is undamaged on delivery. Transport damage Any damage from transport which you have not carried out yourself must...
Before calling service - Technical advice Problems Grill not working? Fuses constantly blowing? Redmedy Check earth leak circuit breaker and fuses. Too many electric bulbs may be in use at the same time.