Xconfiguration Network [1] Qos Diffserv Video; Xconfiguration Network [1] Qos Diffserv Data - Cisco TelePresence SX20 Codec Reference Manual
Application programming interface (api)
Hide thumbs
Also See for TelePresence SX20 Codec:
- Reference manual (218 pages) ,
- Administrator's manual (177 pages) ,
- User manual (88 pages)
Table of Contents
Advertisement
Cisco TelePresence SX20 Codec
Introduction
xConfiguration Network [1] QoS Diffserv Video
This setting will only take effect if Network QoS Mode is set to Diffserv.
Define which priority Video packets should have in the IP network. The packets on the presen-
tation channel (shared content) are also in the Video packet category. The priority for the
packets ranges from 0 to 63 - the higher the number, the higher the priority. The recommended
class for Video is CS4, which equals the decimal value 32. If in doubt, contact your network
administrator.
The priority set here might be overridden when packets are leaving the network controlled by
the local network administrator.
Requires user role: ADMIN
Default value: 0
USAGE:
xConfiguration Network
n
QoS Diffserv Video:
where
n
: Index that identifies the network. Range: 1..1
Video
: Integer (0..63)
Set the priority of the video packets in the IP network - the higher the number, the
higher the priority. The default value is 0 (best effort).
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API
xConfiguration
xConfiguration
Video
xCommand
xConfiguration Network [1] QoS Diffserv Data
This setting will only take effect if Network QoS Mode is set to Diffserv.
Define which priority Data packets should have in the IP network.
The priority for the packets ranges from 0 to 63 - the higher the number, the higher the prior-
ity. The recommended value for Data is 0, which means best effort. If in doubt, contact your
network administrator.
The priority set here might be overridden when packets are leaving the network controlled by
the local network administrator.
Requires user role: ADMIN
Default value: 0
USAGE:
xConfiguration Network
QoS Diffserv Data:
n
where
n
: Index that identifies the network. Range: 1..1
Data
: Integer (0..63)
Set the priority of the data packets in the IP network - the higher the number, the higher
the priority. The default value is 0 (best effort).
59
API Reference Guide
xStatus
Appendices
Data
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Advertisement
Table of Contents
