Cisco TelePresence SX20 Codec
Introduction
xConfiguration Network [1] IPv6 Address
Define the static IPv6 network address for the system. Applicable only when the Network IPv6
Assignment is set to Static.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network
n
IPv6 Address: "Address"
where
n
: Index that identifies the network. Range: 1..1
Address
: String (0, 64)
A valid IPv6 address.
xConfiguration Network [1] IPv6 Gateway
Define the IPv6 network gateway address. This setting is only applicable when the Network
IPv6 Assignment is set to Static.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network
n
IPv6 Gateway: "Gateway"
where
n
: Index that identifies the network. Range: 1..1
Gateway
: String (0, 64)
A valid IPv6 address.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API
xConfiguration
xConfiguration
xCommand
xConfiguration Network [1] IPv6 DHCPOptions
Retrieve a set of DHCP options, for example NTP and DNS server addresses, from a DHCPv6
server.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Network
n
IPv6 DHCPOptions:
where
n
: Index that identifies the network. Range: 1..1
DHCPOptions
: Off/On
Off: Disable the retrieval of DHCP options from a DHCPv6 server.
On: Enable the retrieval of a selected set of DHCP options from a DHCPv6 server.
xConfiguration Network [1] MTU
Define the Ethernet MTU (Maximum Transmission Unit).
Requires user role: ADMIN
Default value: 1500
USAGE:
xConfiguration Network
n
MTU:
where
n
: Index that identifies the network. Range: 1..1
MTU
: Integer (576..1500)
Set a value for the MTU (bytes).
57
API Reference Guide
xStatus
Appendices
DHCPOptions
MTU
Copyright © 2016 Cisco Systems, Inc. All rights reserved.