Table of Contents
Advertisement
Quick Links
Model shown is KX-TG994SK.
Before initial use, see "Getting Started"
on page 12.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte "Guía Rápida Española", página 100.
For assistance, visit our Web site: http://shop.panasonic.com/support for
customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
Operating Instructions
Cordless Phone
KX-TG994SK
Model No.
KX-TGF975
Advertisement
Table of Contents
Related Manuals for Panasonic KX-TGF970 Series
Summary of Contents for Panasonic KX-TGF970 Series
- Page 1 Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 100. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support...
-
Page 2: Table Of Contents
Table of Contents Introduction Call Block Model composition ........4 Call block ............38 Accessory information ........4 Storing unwanted callers ......38 Graphical symbols for use on equipment and Enhanced Call Block their descriptions ..........7 Automated call block ........42 Important Information Telemarketing call block ......44 For your safety ..........8 One ring scam alert ........45 Important safety instructions ......9... - Page 3 Table of Contents FCC and other information ......97 Guía Rápida Española Guía Rápida Española ......100 Appendix Customer services ........111 Limited Warranty (ONLY FOR U.S.A.) ..112 Index Index............114...
-
Page 4: Model Composition
The desk stand/wall mounting adaptor comes attached to the base unit. See page 5 for replacement battery information. The handset cover comes attached to the handset. PNLC1084ZS PNLC1084YS Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 111). For assistance, please visit http://shop.panasonic.com/support... - Page 5 This product can be purchased online. Please visit our Web site: http://shop.panasonic.com/support By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached.
- Page 6 R The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. R iPhone and Siri are registered trademarks of Apple Inc. R Android, Gmail, Google Calendar and Google Assistant are trademarks of Google LLC.
-
Page 7: Graphical Symbols For Use On Equipment And Their Descriptions
Insulation or Reinforced Insulation) Direct current (D.C.) “ON” (power) Protective earth “OFF” (power) Protective bonding earth Stand-by (power) Caution, risk caused by “ON”/“OFF” (power; visible radiation push-push) For indoor use only Caution, risk of electric shock For assistance, please visit http://shop.panasonic.com/support... -
Page 8: Important Information
Radio R Never install telephone line jacks in wet waves emitted from this product may cause locations unless the jack is specifically such devices to malfunction resulting in an designed for wet locations. accident. For assistance, please visit http://shop.panasonic.com/support... -
Page 9: Important Safety Instructions
4. Use only the power cord and batteries R Avoid the use in the following conditions indicated in this manual. Do not dispose of batteries in a fire. They may explode. For assistance, please visit http://shop.panasonic.com/support... -
Page 10: For Best Performance
R Operating the product near electrical Base unit location/avoiding noise appliances may cause interference. Move away from the electrical appliances. The base unit and other compatible Panasonic units use radio waves to communicate with Routine care each other. R For maximum coverage and noise-free... -
Page 11: Specifications
Standby: 1.2 W Maximum: 4.5 W Charger: Standby: 0.1 W Maximum: 1.8 W R Operating conditions: 0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry) For assistance, please visit http://shop.panasonic.com/support... -
Page 12: Getting Started Setting Up
(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note: R Use only the supplied Panasonic AC adaptor PNLV226. R Follow the directions on the display to set up the unit. - Page 13 Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 5, 9. Note for battery charging R It is normal for the handset to feel warm during charging.
-
Page 14: Controls
– when answer by voice command is turned on (page 35). Belt clip holes Speaker MZN (SP-PHONE: Speakerphone) Headset jack N (TALK) Dial keypad *: Temporary tone dialing 0: ( ) Ringer off Microphone Receiver Display MCALL BLOCKN For assistance, please visit http://shop.panasonic.com/support... - Page 15 Navigator key – MDN, MCN, M N, or M N: Scroll through various lists and items. – VOL. (Volume: MDN or MCN): Adjust the speaker volume while talking. – M N: Repeat/skip messages during playback. For assistance, please visit http://shop.panasonic.com/support...
-
Page 16: Display Icons/Indicators
Equalizer is set. (page 26) Speakerphone is on. Item Meaning (page 24) Ringer volume is off. Ringer volume is off. (page 32, 60) (page 25, 54, 56) Silent mode is on. (page 63) Silent mode is on. (page 63) For assistance, please visit http://shop.panasonic.com/support... -
Page 17: Language Settings
You can select the language used for the Status Meaning following features. – Answering system guidance A cellular phone is connected. – Automated call block guidance Ready to make/receive – Telemarketing call block guidance cellular calls. – Talking Caller ID For assistance, please visit http://shop.panasonic.com/support... -
Page 18: Date And Time
Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 76 for details. Handset MMENUN#302 MbN: “Yes” a MSELECTN For assistance, please visit http://shop.panasonic.com/support... - Page 19 To turn this feature on, select the desired announcement interval, or select “Off” to turn this feature off. The default setting is “Every hour”. Handset MMENUN#176 MbN: Select the desired setting. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support...
-
Page 20: Link To Cell
Bluetooth device such as a Bluetooth Handset headset is connected to your cellular phone. Base unit: For CELL 1: MMENUN#6111 Press and hold MCELL 1N or MCELL 2N For CELL 2: MMENUN#6112 for about 5 seconds. For assistance, please visit http://shop.panasonic.com/support... -
Page 21: Link To Cell Settings
Talking Caller ID setting (page 56, page 21. 60). To change the handset ringer tone for a – “On (with Talking CID)” (default): cellular line, see page 54. The handset and base unit use your cellular For assistance, please visit http://shop.panasonic.com/support... - Page 22 – Answering system (page 76) automatically be connected to the base unit Messages cannot be received. in 30 minutes. If you do not use the link to For assistance, please visit http://shop.panasonic.com/support...
- Page 23 Enter the new 4-digit PIN again. a MSAVEN a MOFFN MbN: Select the desired setting. a MSAVEN Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN After the Bluetooth device is paired, the device name is displayed. For assistance, please visit http://shop.panasonic.com/support...
-
Page 24: Making/Answering Calls Using The Handset
If the receiver volume is set to level 5 R To switch to the speaker, press MZN. (max.), it will be changed to level 4 in the To switch back to the receiver, press MZN/ next call. For assistance, please visit http://shop.panasonic.com/support... -
Page 25: Answering Calls
(page 58). by pressing M Temporary handset ringer off: You can turn R The base unit user can take the call by the ringer off temporarily by pressing M N (left pressing MSP-PHONEN. soft key). For assistance, please visit http://shop.panasonic.com/support... - Page 26 R The setting you made is kept for each line (landline and cellular lines). R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, select another setting. For assistance, please visit http://shop.panasonic.com/support...
- Page 27 – An error tone sounds. press MBACKN to return to the outside call. Call share To complete the transfer: Press MOFFN. You can join an existing outside call. To establish a conference call: MMENUN a MbN: “Conference” a MSELECTN For assistance, please visit http://shop.panasonic.com/support...
- Page 28 During a conversation using a cellular phone, press MCELLN. R The call is transferred to the handset in the following situations. – Only 1 cellular phone is paired. – A specific line is set to make cellular calls (page 23). For assistance, please visit http://shop.panasonic.com/support...
-
Page 29: Power Backup Operation For Landline
You should leave one handset on the base unit for supplying the power, and use another Making calls during a power handset for making calls. failure n When only 1 handset is registered: Lift the handset and dial the phone number. For assistance, please visit http://shop.panasonic.com/support... - Page 30 R Do not use or lift the handset which is placed on the base unit during power backup mode. Note: R The range of the base unit is limited during a power failure. Please use the handset close to the base unit. For assistance, please visit http://shop.panasonic.com/support...
-
Page 31: Making/Answering Calls Using The Base Unit
(48 digits max. each). MREDIALN Adjusting the speaker volume MbN: Select the desired entry. Press MDN or MCN repeatedly while talking. MSP-PHONEN Note: R The speaker volume you set is kept for each line (landline and cellular lines). For assistance, please visit http://shop.panasonic.com/support... -
Page 32: Answering Calls
(page 60). Note: R The ringer volume you set is kept for each R To change the flash time, see page 58. line (landline and cellular lines). For assistance, please visit http://shop.panasonic.com/support... - Page 33 R You can continue the conversation Outside calls can be transferred or a with the outside caller. conference call with an outside party can be Note: made between a handset and the base unit. R When recording is completed: For assistance, please visit http://shop.panasonic.com/support...
- Page 34 MCELL 1N or MCELL 2N. R The cellular call is transferred to the base unit. Answering a 2nd call If you receive a call while talking on the phone, the interrupt tone sounds (page 60) and the For assistance, please visit http://shop.panasonic.com/support...
-
Page 35: Answer By Voice Command
MbN: Select the desired setting. a monitor is set to “On” (page 59). MSAVEN R The configured settings are common for all Proceed with the operation for your unit. lines (landline and cellular lines). Handset: MOFFN Base unit: MEXITN For assistance, please visit http://shop.panasonic.com/support... - Page 36 When you finish talking, press MOFFN on the handset or MSP-PHONEN on the base unit. Note for base unit: R In step 1, you need to answer a call while the base unit is not ringing or not announcing caller information. For assistance, please visit http://shop.panasonic.com/support...
-
Page 37: Intercom
Base unit: MEXITN R You cannot use voice paging if other units are in use. Note: R This feature is not available for all handsets paging and voice paging even if it is turned For assistance, please visit http://shop.panasonic.com/support... -
Page 38: Call Block
– when a landline call (or cellular call) is being received during a cellular call (or Handset landline call). R Blocked calls are logged in the caller list. n When a cellular phone is paired: MCN CID For assistance, please visit http://shop.panasonic.com/support... - Page 39 Edit the phone number if necessary (24 Handset digits max.). a MSAVEN a MEXITN MCALL BLOCKN MbN: “Block unknown CID” a Adding call blocked numbers manually MSELECTN MbN: Select the desired setting. a Handset MSAVEN a MOFFN MCALL BLOCKN For assistance, please visit http://shop.panasonic.com/support...
- Page 40 MbN: Select the desired entry. MbN: “Yes” a MSELECTN R After viewing, press MOFFN to exit. MbN: “Yes” a MSELECTN a MEXITN To edit a number: MEDITN a Edit the number. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support...
- Page 41 MbN: “Blocked calls count” a MSELECTN R To exit, press MOFFN. MCLEARN MbN: “Yes” a MSELECTN a MOFFN Base unit MCALL BLOCKN MbN: “Blocked count” a MSELECTN R To exit, press MEXITN. MCLEARN MbN: “Yes” a MSELECTN a MEXITN For assistance, please visit http://shop.panasonic.com/support...
-
Page 42: Enhanced Call Block
– toll saver R We recommend you perform a test run of R When the unit receives a call from a caller the automated call block procedure to who is not registered in the phonebook, For assistance, please visit http://shop.panasonic.com/support... - Page 43 If the name stored in the allow name list a MEXITN matches the incoming Caller ID, the unit rings. Callers listed in the allow name list are not required to enter the access code. For assistance, please visit http://shop.panasonic.com/support...
-
Page 44: Telemarketing Call Block
The unit will play the recorded greeting R The unit prompts callers to say their message for automated call block. a names. MOFFN To answer the call: Press M N or MZN. To block the call: For assistance, please visit http://shop.panasonic.com/support... -
Page 45: One Ring Scam Alert
During an incoming call, if the caller disconnects the call after 1 or 2 rings, the call is judged to be a scam call. Depending on the number of rings made before a call is For assistance, please visit http://shop.panasonic.com/support... - Page 46 R When a phone number is judged as a scam call, “ ” will be displayed in the caller list unless: – the number is identified as Automated call block. – the number is stored in the call block list. For assistance, please visit http://shop.panasonic.com/support...
-
Page 47: Phonebook
The following operations are also available. Note for handset and base unit: R The name stored in the phonebook will be reflected in the redial list after you make a call using that phonebook entry. For assistance, please visit http://shop.panasonic.com/support... - Page 48 R To edit the number, press MEDITN Once you have found the desired entry using repeatedly until the phone number is one of the following 4 methods, make a call shown in the desired format. with your unit. MSAVEN For assistance, please visit http://shop.panasonic.com/support...
- Page 49 MbN: Scroll through the phonebook if MOKN necessary. MbN: Select the desired group (page 48). a MSELECTN 2 times a MOFFN Searching by query You can narrow down the search to enter the first characters of a name. For assistance, please visit http://shop.panasonic.com/support...
-
Page 50: Speed Dial
(1 to 9). a MADDN Handset / Base unit MbN: “Phonebook” a MSELECTN MbN: Select the desired entry. a Proceed with the operation for your unit. Handset: During an outside call, press MSAVEN a MOFFN MFN W. For assistance, please visit http://shop.panasonic.com/support... - Page 51 – A specific line is set to make cellular calls (page 23). MbN: Select the desired cellular phone. a MSELECTN n Using a landline: Press and hold the desired speed dial key (1 to 9). To make a call, press M For assistance, please visit http://shop.panasonic.com/support...
-
Page 52: Programming
Operation Code Viewing the caller list. #213 “Answering device” Main menu: Sub-menu 1 Sub-menu 2 Settings Code Play new message – – #323 Play all message – – #324 Erase all – – #325 message For assistance, please visit http://shop.panasonic.com/support... - Page 53 Screen call #310 <On> Answer on – – #327 Answer off – – #328 “Voicemail access” Main menu: Operation Code Listening to voicemail messages. #330 Main menu: “Intercom” Operation Code #274 Paging the desired unit. For assistance, please visit http://shop.panasonic.com/support...
- Page 54 – Alert tone <Tone 2> #6042 Pair – #6241 #6242 Unpair – #6111 #6112 Phonebook – – #618 transfer Headset Add new device – #621 Connect – #622 Disconnect Pair #621 – Unpair #612 – For assistance, please visit http://shop.panasonic.com/support...
- Page 55 Date and time – – #101 Memo alarm Alarm1–3 <Off> #720 Once Daily Weekly <Caller ID auto> Time adjustment – #226 – *1, *9 Manual “Speed dial” Main menu: Operation Code Viewing the speed dial entry. #261 For assistance, please visit http://shop.panasonic.com/support...
- Page 56 <Off> – Alarm1–3 Once Daily Weekly <Caller ID auto> Time adjustment #226 *1, *9 – Manual Talking caller ID #162 – <On> Low battery alert – #176 <Every hour> Every 3 hours Every 6 hours For assistance, please visit http://shop.panasonic.com/support...
- Page 57 Range of numbers – Block unknown CID Block #240 (CID: Caller ID) <Unblock> One ring for #173 blocked call <No> Blocked calls #177 – count Speed dial – – #261 Record greeting #302 – – For assistance, please visit http://shop.panasonic.com/support...
- Page 58 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms <700 ms> 900 ms Set line mode #122 – *1, *17 <B> Call sharing – <On> #194 For assistance, please visit http://shop.panasonic.com/support...
- Page 59 Main menu: W “Phonebook” Operation Code #280 Viewing the phonebook entry. “Caller list” Main menu: Operation Code Viewing the caller list. #213 “Answer device” Main menu: Sub-menu 1 Sub-menu 2 Settings Code Screen call – <On> #310 For assistance, please visit http://shop.panasonic.com/support...
- Page 60 Cell 2 Group 4-9 Talking CID – #162 <Off> 1 ring One ring scam – #798 <1 or 2 rings> Block/Unblock Block Auto. call block #787 <Unblock> Allow name list #794 – Blocked count #790 – For assistance, please visit http://shop.panasonic.com/support...
- Page 61 To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller ID subscribers only) To use this feature, set the date and time first (page 18). For assistance, please visit http://shop.panasonic.com/support...
-
Page 62: Alarm
Turns alarm off. Go to step 10. outside calls. “Once” MbN: Select the desired snooze setting. An alarm sounds once at the set time. a MSAVEN MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support... -
Page 63: Silent Mode
Enter the desired hour and minute you Baby monitor wish to end this feature. *: Select “AM” or “PM”. This feature allows you to listen in on a room where another handset is located, allowing MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support... - Page 64 R The registered name/number is displayed. R “Baby monitor” will be displayed. R The registered unit’s name/number is Turning off the baby monitor displayed. The monitored handset cannot be used while baby monitor is set to “On”. For assistance, please visit http://shop.panasonic.com/support...
-
Page 65: Other Programming
“Handset 6”. You can customize the name of each handset (“Bob”, “Kitchen”, etc.). This is Handset useful when you make intercom calls between Press MMENUN on the handset being handsets. To display the handset name in monitored. For assistance, please visit http://shop.panasonic.com/support... -
Page 66: Registering A Unit
Handset: MMENUN#130 Base unit: Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. For assistance, please visit http://shop.panasonic.com/support... -
Page 67: Caller Id Service
– A handset is replaced on the base unit or charger. n Using a cellular line – Pressing MOFFN on a handset. Handset – Pressing MEXITN on the base unit. MCN CID For assistance, please visit http://shop.panasonic.com/support... - Page 68 When a cellular phone is not paired: – If you select an entry with “ ” or MCN CID “ ” or “ ” displayed, an error tone MbN: Select the desired entry. a sounds. MMENUN For assistance, please visit http://shop.panasonic.com/support...
- Page 69 This feature can be set for each unit (page 58, 61). The default setting is “On”. Note: R Phone numbers from the 4 most recently edited area codes are automatically edited. For assistance, please visit http://shop.panasonic.com/support...
-
Page 70: Using Bluetooth® Devices
MbN: Select “Auto” or “Manual”. a call. – “Country code”: Your country code for MSELECTN “Auto”: Download all entries from the international calls. cellular phone automatically. Go to step 5. For assistance, please visit http://shop.panasonic.com/support... -
Page 71: Link To Cell App
You can turn each type of alert on or off using icon. the Link to Cell app. If you turn the alerting Follow the on-screen instructions. app on, your DECT phone alerts you with the corresponding information. For assistance, please visit http://shop.panasonic.com/support... -
Page 72: Text Message (Sms) Alert
Proceed with the operation for your unit. Alert settings for your Handset: MOFFN DECT phone Base unit: MEXITN If your cellular phone is paired to the base unit and receives notifications, the handset and/or base unit can alert you: For assistance, please visit http://shop.panasonic.com/support... -
Page 73: Remote Voice Assist
R If your cellular phone is connected to the base unit, you may not be able to use your cellular phone’s microphone to operate its voice recognition feature. In this case, For assistance, please visit http://shop.panasonic.com/support... -
Page 74: Using A Bluetooth Headset (Optional)
MCLEARN, then enter your instructions for details. headset’s PIN. R Some features described here may not be R Typically, default PIN is “0000”. Refer available depending on Bluetooth headset. to the headset’s operating instructions. For assistance, please visit http://shop.panasonic.com/support... - Page 75 While your headset is on a landline call: To join the conversation with the handset, press M Note: R This function may not operate properly depending on specification of the headset. For assistance, please visit http://shop.panasonic.com/support...
-
Page 76: Answering System For Landline
“Greeting only”, callers’ messages are not recorded and the unit Base unit plays a different pre-recorded greeting Press MANSWER ON/OFFN to turn on/off the message asking callers to call again. answering system. For assistance, please visit http://shop.panasonic.com/support... -
Page 77: Listening To Messages
R If there are no new messages, the base To listen to new messages: unit plays back all messages. MMENUN#323 To listen to all messages: MMENUN#324 When finished, press MOFFN. Note: R To switch to the receiver, press M For assistance, please visit http://shop.panasonic.com/support... - Page 78 You can also erase as follows: MPAUSEN a MbN: “Erase” a MMENUN#325 MSELECTN a MbN: “Yes” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN Calling back (Caller ID subscribers only) n Using a landline: Press MPAUSEN during playback. For assistance, please visit http://shop.panasonic.com/support...
-
Page 79: Advanced New Message Alerting Features
Storing a phone number to which the unit makes an alert call Erasing the set phone number Handset Handset n From the phonebook: MMENUN#338 MMENUN#338 MbN: “Notification to” a MSELECTN MMENUN a MbN: “Erase” a MSELECTN For assistance, please visit http://shop.panasonic.com/support... -
Page 80: Remote Operation
Follow the voice guidance prompts as call feature. necessary or control the unit using R Even if the unit makes a new message alert remote commands (page 81). call, the handset redial list does not show When finished, hang up. For assistance, please visit http://shop.panasonic.com/support... -
Page 81: Answering System Settings
For Spanish voice guidance only The default setting is “4 rings”. “Toll saver”: The unit’s answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end For assistance, please visit http://shop.panasonic.com/support... - Page 82 – If you do not record your own message, the unit will play the pre-recorded greeting-only message asking callers to call again later. – If you use your own message, record the greeting-only message asking callers to call again later (page 76). For assistance, please visit http://shop.panasonic.com/support...
-
Page 83: Useful Information
Handset number and your mailbox password, press MMENUN#332 MDN (Pause) to add pauses (page 25) between the access number and the MbN: Select the desired setting. a password as necessary. Contact your MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support... -
Page 84: Wall Mounting
The base unit can be mounted on a wall by changing the wall mounting adaptor’s position. Note: R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. For assistance, please visit http://shop.panasonic.com/support... - Page 85 Fit the slots of the unit onto the corresponding wall phone plate tabs for ( ) and ( ) respectively. Charger Drive the screws ( ) (not supplied) into the wall. 27.2 mm (1 inches) For assistance, please visit http://shop.panasonic.com/support...
-
Page 86: Error Messages
R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode (page 22). Checking R The automated call block function is in operation. Try again later. For assistance, please visit http://shop.panasonic.com/support... -
Page 87: Troubleshooting
R Check the connections (page 12). R Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 66). For assistance, please visit http://shop.panasonic.com/support... - Page 88 R If your cellular phone is already registered on another Panasonic DECT phone, this function will not work properly. We strongly recommend that you remove the registration of this phone on both your cellular phone and on the other Panasonic DECT phone.
- Page 89 R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. For assistance, please visit http://shop.panasonic.com/support...
- Page 90 “On (with Talking CID)” or is very low. “On (without Talking CID)”, turn this feature off to use the ringer tones of the handset and base unit (page 21). For assistance, please visit http://shop.panasonic.com/support...
- Page 91 Caller information is displayed R Depending on your phone service provider, the unit may or announced late. display or announce the caller’s information at the 2nd ring or later. R Move closer to the base unit. For assistance, please visit http://shop.panasonic.com/support...
- Page 92 After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). For assistance, please visit http://shop.panasonic.com/support...
- Page 93 AC adaptor to the base unit. Wait a feature. few seconds and try again. R The headset has not connected to the base unit yet, even though you performed the connecting procedure setting. Wait a few seconds and try again. For assistance, please visit http://shop.panasonic.com/support...
- Page 94 R If you have multiple voice recognition features installed in your cellular phone, you may need to set the desired voice recognition feature as the default. If you cannot set the default, delete the other voice recognition features. For assistance, please visit http://shop.panasonic.com/support...
- Page 95 Problem Cause/solution I cannot remember the PIN. R Change the PIN using the following method. Handset: MMENUN#619 *7000 Enter the new 4-digit PIN. a MOKN Enter the new 4-digit PIN again. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support...
- Page 96 Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution: R To avoid permanent damage, do not use a microwave oven to speed up the drying process. For assistance, please visit http://shop.panasonic.com/support...
-
Page 97: Fcc And Other Information
But if advance notice isn't practical, the accessory or the speakerphone option (if telephone company will notify the customer applicable) when using this phone. Consult as soon as possible. Also, you will be with your audiologist or Hearing Aid For assistance, please visit http://shop.panasonic.com/support... - Page 98 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is For assistance, please visit http://shop.panasonic.com/support...
- Page 99 Useful Information Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Compatible with Hearing Aid T-Coil TIA-1083 For assistance, please visit http://shop.panasonic.com/support...
-
Page 100: Guía Rápida Española
Guía Rápida Española Guía Rápida Española Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés) - Page 101 Guía Rápida Española Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
- Page 102 {<} k {>} {V} {^} {V} {7} {8} {^} {V} {7} {8} {<} {>} }(11) s {r} } s { } s { }(112 s {r} } s { Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
- Page 103 Guía Rápida Española }(1)1 } s { }(3)2 s {r} Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
- Page 104 Guía Rápida Española Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
- Page 105 Guía Rápida Española }(6251 }(6252 }(157 } s {r} Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
- Page 106 Guía Rápida Española {C} {s} s {C} {s} {C} {s} {^} {V} {>} s {r} } s {r} {C} {s} {^} {V} } s {r} {^} {V} Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
- Page 107 Guía Rápida Española {<} k s { ( s {r} {<} k s {r} } s {r} {k} s {r} }(323 }(324 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
- Page 108 Guía Rápida Española }(618 } s {r} Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
- Page 109 Guía Rápida Española }(621 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
- Page 110 Guía Rápida Española }(13) Para obtener ayuda, visite http://shop.panasonic.com/support (solo en inglés)
-
Page 111: Appendix
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to h p://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Ba eries, Backup Chargers &... -
Page 112: Limited Warranty (Only For U.s.a.)
If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts,... - Page 113 If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Panasonic Corporation of North America Consumer Affairs Department 8th FI. Two Riverfront Plaza...
-
Page 114: Index
Index Dialing mode: 18 Direct command code: 52 Index Display Contrast: 58, 61 3-way conference: 27, 33 Language: 17 Additional handset: 66 Eco mode: 14 Alarm: 62 Equalizer: 26 Answer by voice command: 35 Error messages: 86 Answering calls: 25, 32 Flash: 26, 32, 58 Answering system Groups: 48... - Page 115 Index Rotary/pulse service: 26, 33 Silent mode: 63 Speed dial: 50 SP-PHONE (Speakerphone): 24 Talking Caller ID: 67 Telemarketing call block: 44 Temporary tone dialing: 26, 33 Time adjustment: 56 Transferring calls: 27, 33 Troubleshooting: 87 TTY: 111 VM (Voicemail): 83 Voice announcement language: 17 Voice paging: 37 Voicemail: 83...
- Page 116 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available. For your future reference We recommend keeping a record of the following information to assist with any repair under warranty.