Page 1
OPERATING INSTRUCTIONS TX-43HX580B / TX-43HX580BZ / TX-43HX585B TX-50HX580B / TX-50HX580BZ / TX-50HX585B TX-55HX580B / TX-55HX580BZ / TX-55HX585B TX-65HX580B / TX-65HX580BZ / TX-65HX585B LED TV You can find instructions for your TV’s features in the E-Manual. -MANUAL To access the E-Manual, enter Settings menu, select Manuals and press...
• Do not place any heat sources such as electric Safety Information heaters, radiators, etc. near the TV set. • Do not place the TV on the floor and inclined CAUTION surfaces. • To avoid danger of suffocation, keep plastic bags RISK OF ELECTRIC SHOCK out of the reach of the babies, children and domestic DO NOT OPEN...
Page 4
WARNING has therefore to be provided through a device providing electrical isolation below a certain frequency range Do not ingest the battery, Chemical Burn Hazard (galvanic isolator) This product or the accessories supplied with the product may contain a coin/button cell battery. If the WALL MOUNTING WARNINGS coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead...
Maintenance Assembling / Removing the pedestal First, remove the mains plug from the mains Preparations socket. Take out the pedestal(s) and the TV from the packing Display panel, Cabinet, Pedestal case and put the TV onto a work table with the screen panel down on the clean and soft cloth (blanket, etc.) Regular care: •...
Maximum or Auto the TV will reduce the energy When using the wall-hanging bracket consumption accordingly. Set as Off to turn this setting Please contact your local Panasonic dealer to off. If you like to set the Backlight to a fixed value set purchase the recommended wall-hanging bracket.
• PLL (Frequency Search) Vision content is detected: Dolby Vision Bright and Dolby Vision Dark. Both allow the user to experience • PC input the content in the way the creator originally intended • Game Mode (Optional) with different ambient lighting conditions. •...
Note: The position of the joystick may differ depending on Press Exit button to close the main menu. the model. 1. Home To change volume: Increase the volume by pushing When main menu is opened Home menu bar will the joystick right. Decrease the volume by pushing be highlighted.
after that. In order to do that press OK, highlight Save Power Connection Changes and press OK again. IMPORTANT: The TV set is designed to operate on a 3. Settings 220-240V AC, 50 Hz supply. After unpacking, allow the TV set to reach the ambient room temperature before You can manage the settings of your TV using the you connect the set to the mains.
Declaration of Conformity (DoC) Microsoft. Hereby, Panasonic Marketing Europe GmbH, declares Content owners use Microsoft PlayReady™ content that this TV is in compliance with the essential require- access technology to protect their intellectual property, ments and other relevant provisions of the Directive including copyrighted content.
The requirements for any country may change at any time. It’s recommended that user checks with local Panasonic assumes no responsibility and makes no authorities for the current status of their national reg- warranty for the availability or the continuity of the ulations for 5 GHz wireless LAN’s.
Remote Control Standby: Switches On / Off the TV Info: Displays information about on-screen content, shows hidden information (reveal - in TXT mode) Guide: Displays the electronic programme guide Home: Displays TV menu Directional buttons: Helps navigate menus, content etc. and displays the subpages in TXT mode when pressed Right or Left OK: Confirms user selections, holds the page (in TXT mode), views Channels menu (DTV mode)
Connections See the illustrations on the left Connector Type Cables Device side. You can use YPbPr to VGA cable to enable YPbPr signal via VGA input. You cannot use VGA and YPbPr at the same time. To Connection enable PC/YPbPr audio, you will (back) need to use the back audio inputs with a YPbPr/PC audio cable for...
for each highlighted feature before making any Switching On/Off changes. You can use Programme +/- buttons to To Switch the TV On scroll up and down to read the entire text. You will Connect the power cord to a power source such as a be able to change your preferences at any time wall socket (220-240V AC, 50 Hz).
When finished, highlight Next and press OK button Media Playback via USB Input to continue. You can connect 2.5” and 3.5” inch (HDD with external power Note: Searching duration will change depending on the supply) external hard disk drives or USB memory stick to your selected Search Step.
CEC option will be set as Enabled automatically, if it is not already set. The TV speakers will be muted and Loop/Shuffle Mode Operation the sound of the watched source will be provided from All files in the list will be the connected sound system.
Settings Menu Content Picture Menu Content You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game(optional), Sports, Dynamic Mode and Natural. Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture mode options will be available instead of Cinema and Natural modes.
Page 19
You can use this option to set the range of colours displayed on your TV screen. When set as On, colours are set according to the source signal. When set as Off, the TV’s Gamut Mapping maximum colour capacity is used by default (recommended option). Note: This option may not be available depending on the TV model and its features.
Page 20
Sets headphone volume. This option will not be available if the option Sound Output set as Lineout. Headphone Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing. Reset Resets some of the sound settings to factory defaults.
Page 21
System Menu Content Conditional Access Controls conditional access modules when available. Language You may set a different language depending on the broadcaster and the country. Manage your privacy privileges for smart TV related applications. Press OK to enter Privacy Settings (*) the menu and set according to your preferences.
Page 22
Software Ensures that your TV has the latest firmware. Press OK to see the menu options. Upgrade Application Displays current software version. Version This option is used to select which subtitle mode will be on the screen (DVB subtitle / Subtitle Mode Teletext subtitle) if both is available.
(*) This feature may not be available depending on the model of General TV Operation your TV and the selected country in the First Time Installation. Using the Channel List Set PIN: Defines a new PIN number. The TV sorts all stored stations in the channel list. You Default CICAM PIN: This option will appear as greyed can edit this channel list, set favourites or set active out if no CI module is inserted into the CI slot of the...
Now/Next Schedule and the OK button. The operation method may differ depending on the contents of the digital teletext. Follow In this layout option, only the current and next events the instructions displayed on the digital teletext screen. of the listed channels will be displayed. You can use When the Text button is pressed again, the TV returns the directional buttons to scroll through the list of the to television broadcast.
PC Input Typical Display Modes Troubleshooting & Tips The following table is an illustration of some of the TV will not turn on typical video display modes. Your TV may not support Make sure the power cord is plugged in securely to a all resolutions.
Internet Speed Test Connectivity Highlight Internet Speed Test and press the OK Wired Connectivity button. TV will check the internet connection bandwidth To Connect to a Wired Network and display the result when complete. • You must have a modem/router connected to an Advanced Settings active broadband connection.
Handling of the customer information as Disabled. When using Internet connecting function of this TV, after agreeing to Panasonic’s terms of service / privacy You can save your wireless network profile using the policy (hereinafter referred to as terms and conditions Save option in the Advanced Settings menu.
• Registered information may be registered in the other WLAN compatible devices. Try changing the server etc. of provider. Before repairing, transferring active channel on the WLAN router. Internet Connection Not Available / Audio Video or discarding this TV, be sure to erase the information Sharing Not Working according to the terms and conditions etc.
network will be listed. Select one and press OK to Integrated TV Player applications will be displayed. continue. The media browser will then be displayed. Select one and press the OK button. Then select a content that you want to play back and press the OK Refer to the Media Browser menu section for further button to watch.
Enter the address of a website(URL) into the search/ • The application can be terminated and another address bar and highlight the Submit button on the autostart red button application can be launched. virtual keyboard and press the OK button to visit the HbbTV allows the applications to be retrieved both from site.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : Green&Yellow (Earth) (if there is earth cable) Blue (Neutral) Brown (Live) Fuse...