SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
The ventilation opening in the base must not be covered by a • carpet, mat, or any floor covering. The appliance must be connected to the water mains using the • new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.
• This appliance complies with the E.E.C. • Make sure that all metal objects are removed Directives. from the laundry. • Do not wash fabrics which are heavily soiled WATER CONNECTION with oil, grease or other greasy substances. It can damage rubber parts of the washing •...
Feet for levelling the appliance CHILD SAFETY DEVICE This device prevents children or pets to be closed in the drum. Turn the device clockwise, until the groove is horizontal. You cannot close the door. To close the door, turn the device anticlockwise until the groove is verti- cal.
DISPLAY A. The time area: • : the rinses phase • Programme time. • : the washing phase • The alarm codes. Refer to the When a programme is set, all the chapter “Troubleshooting” for their indicators of the phases related to the description.
Page 7
Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed 3 kg Delicate fabrics such as acrylics, viscose, polyester Delicates (deli- 800 rpm items. Normal soil. cates) 40°C - (Cold) 6 kg Items in denim and jersey. Normal soil. Jeans (Jeans) 800 rpm 60°C -...
Page 8
Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed To switch the appliance on or off and for cancelling the programme which is running. On/Off 1) Standard programme for the "Egyptian" Energy Label consumption values. According to regu- lation 4100/2006 , the most efficient for washing soiled cotton laundry.
OPTIONS The Time Manager is available only with the TEMP programmes in the table. Set this option to change the default temperature. Indicator = cold water. SPIN With this option you can decrease the default spin speed. The related spin speed indicator comes on. Additional spin options: No Spin •...
EASY IRON DELAY START The appliance carefully washes and spins the With this option you can delay the start of a laundry to prevent the creases. programme from minutes to hours. The appliance decreases the spin speed, uses The display shows the related indicator for more water and adapts the programme duration to example: the type of laundry.
USING DETERGENT AND ADDITIVES CAUTION! Make sure that no laundry Open the detergent Measure out the deter- stays between the seal and the door. drawer . gent. There is a risk of water leakage or damage to the laundry. DETERGENT COMPARTMENTS CAUTION! Use only specified deter- gents for washing machine.
STARTING A PROGRAMME WITHOUT THE 2. Change the options. DELAY START 3. Press the Start/Pause button again. Press the button The programme continues. • The indicator of the button stops to CANCELLING A RUNNING PROGRAMME flash and stays on. • The programme starts, the door locks, the 1.
• You can open the door. The appliance spins and drains or only drains. • Remove the laundry from the appliance. Make 3. When the programme is completed and the sure that the drum is empty. door lock indicator goes off, you can open •...
ECOLOGICAL HINTS softener for washing machines. In areas where the water hardness is soft it is not necessary to use a • Always start a washing programme with the water softener. maximum load of laundry allowed. • If necessary, use a stain remover when you set a To know the water hardness in your area, contact programme with a low temperature.
Remove the top part of Open the pump door. the additive compartment Place a container close to aid cleaning. to the pump to collect Flush it out under a tap, to any spillage. remove any traces of ac- cumulated powder. Unscrew carefully the Make sure that all washing drain filter to drain out the...
EMERGENCY DRAIN Close the pump door. Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (8) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate the drain system again: 1.
• - The mains supply is unstable. Wait until WARNING! Deactivate the appliance the mains supply is stable. before you do the checks. • - No communication between electronic elements of the appliance. Switch off and switch on again. POSSIBLE FAILURES Problem Possible solution The programme does not...
Problem Possible solution You cannot open the appli- • Make sure that the washing programme is finished. ance door. • Set the drain or the spin programme if there is water in the drum. The appliance makes an • Make sure the levelling of the appliance is correct. Refer to "Instal- unusual noise.
ENVIRONMENTAL CONCERNS with the symbol with the household waste. Recycle materials with the symbol . Put the Return the product to your local recycling facility or packaging in relevant containers to recycle it. Help contact your municipal office. protect the environment and human health by recycling waste of electrical and electronic appliances.