Table of Contents
Advertisement
Removing the Secondary Hard Disk Drive Module
1. Remove the Battery. See "Removing the Battery Pack" on page 44.
2. Remove the HDD2 Cover. See "Removing the Lower Covers" on page 47.
3. Remove the two securing screws from the HDD.
Step
HDD2 Carrier
4. Grasp the Pull Tab and pull the HDD out of the bay as shown.
Chapter 3
Size
M2.0*3.0-I (BKAG)
(NYLOK) IRON
Quantity
2
Screw Type
57
Advertisement
Table of Contents
