Advertisement
Quick Links
L606
Start Here
Read these instructions before using your product.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit and remove all protective materials
from inside the product.
Caution:
Do not touch the translucent part or ink tubes.
3
Lower the scanner unit.
2
Fill ink tanks
Note:
This product requires careful handling of ink. Wear disposable
gloves and place a sheet of paper or plastic under the ink tank when
you fill or refill the ink tanks, as ink may splatter. If ink spills, wipe it off
immediately with a damp towel to avoid permanent stains. If ink gets on
your clothes or belongings, it may not come off.
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
1
Open the ink tank unit cover, then remove the cap for the
black ink tank and attach it to its holder.
2
Unpack the black ink bottle.
3
Snap the bottle tip off, then remove the bottle cap.
Carefully remove the protective seal (avoid touching the ink
underneath the seal), then close the bottle cap tightly.
Caution:
Be sure to close the bottle cap tightly, or ink may leak.
4
Fill the tank using all of the ink in the bottle.
Note:
Refer to the color-coded sticker above the ink tank unit to
identify the color of each tank.
Caution:
Be sure to fill each tank with the correct color.
5
Carefully seal the bottle using the reverse side of the bottle
tip for proper disposal.
Advertisement
Related Manuals for Epson L606
Summary of Contents for Epson L606
- Page 1 L606 Fill ink tanks Start Here Note: This product requires careful handling of ink. Wear disposable gloves and place a sheet of paper or plastic under the ink tank when you fill or refill the ink tanks, as ink may splatter. If ink spills, wipe it off immediately with a damp towel to avoid permanent stains.
- Page 2 Close the ink tank securely. Press one of the Iniciar buttons to start charging the ink. Ink charging takes approximately 20 minutes. Ink charging is complete when the power light stops flashing. 20 minutes Repeat the previous steps for the other three ink bottles. Note: The ink bottles included with the printer are designed for printer setup and not for resale.
- Page 3 • Use Epson Print Enabler (free from Google Play™) with Android™ devices (v4.4 or later). Then connect your printer Select the paper settings on the product’s control panel.
- Page 4 L606 refill inks Color Part number Black EPSON is a registered trademark, Epson Connect is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Designed for Excellence is a trademark of Cyan Epson America, Inc.