Table of Contents
Advertisement
Install the Router
Figure 10: Attaching Mounting Brackets to Router for a 19-Inch EIA Rack (Rear Position)
Depending on the rack on which you are installing the chassis, you may need to install either front, mid, or rear
Note
mount brackets only.
Step 2
Secure the bracket to the router with the recommended maximum torque of 10 inch-pounds (1.1 newton meters).
Set Up Device on Rack
Note
Ensure adequate clearance when mounting the device on a rack.
Note
Install cable guides before installing the device in a 19 inches (48.3 centimeters) EIA rack.
Step 1
Position the device on the rack, and use the images as a guide to set up the device.
Cisco ASR-920-12SZ-A and Cisco ASR-920-12SZ-D Aggregation Services Router Hardware Installation Guide
Set Up Device on Rack
31
Advertisement
Table of Contents
