Table of Contents
Advertisement
Watching external input
Connect the external equipment (VCRs, DVD equipment, etc.) and you can
watch through the input.
1. Display the input selection menu with
2. Select the input mode connected to the equipment with
OK
to watch (The selected mode is displayed on the top left of the screen)
TV receives input signals automatically connecting with SCART when
●
playback starts.
– Input signals are automatically identified by the SCART (pin 8) terminal.
– This function is also available for HDMI connections.
– When input mode is not switched automatically, perform as above or
check the setup of the equipment.
You can also select the input pressing
●
INPUT/OK/HOLD for MENU button on the control panel of the TV. Press
repeatedly until the desired input is selected.
To switch between
●
You can label or skip each input mode. Skipped inputs will not be
●
displayed when
AV
Settings
The remote control is capable of operating the contents or external
●
equipment.
Watching
To return to TV mode
●
TV
= Note =
If the external equipment has an aspect adjustment function, set it to 16:9.
●
For details, read the manual of the equipment or ask your local dealer.
●
COMPONENT
and
is pressed.
(Input
Setup
Display Settings
External equipment
- 25 -
AV
AV
on the remote control or
VIDEO
in AV2, select with
Labels)
Operating with TV's remote control
/
and press
/
.
Advertisement
Table of Contents
