Table of Contents
Advertisement
Chapter 5
Admin Status
Indicates whether PoE is enabled or
disabled on the port.
Priority
Indicates the PoE priority setting of the port. The
possible values are: Critical, High and Low. The default is
Low.
Power Allocation (milliwatts)
amount of power the device can supply.
Mode
Indicates whether the port is enabled to utilize
PoE.
Power Consumption (milliwatts)
of the power used by the device.
NOTE:
The Modify PoE Page displays the
currently configured PoE ports. This option is
only seen on the SRW208P and SRW208MP.
VLAN Management > Create VLAN
The Create VLAN screen provides information and global
parameters for configuring and working with VLANs.
VLAN Management > Create VLAN
Single VLAN
VLAN ID (2-4094)
Indicates the ID number of the VLAN
being configured. Up to 256 VLANs can be created. This
field is used to add VLANs one at a time. To add the defined
VLAN ID number, press the Add button.
VLAN Name
Displays the user-defined VLAN name.
VLAN Range
VLAN Range. Indicates a range of VLANs being configured.
To add the defined range of VLAN ID numbers, press the
Add Range button.
8-Port 10/100 Ethernet Switch with Webview
Indicates the actual
Indicates the amount
Advanced Configuration
VLAN Table
The VLAN Table displays a list of all configured VLANs. The
VLAN ID, VLAN Name, and status of the VLAN are displayed
here. To remove a VLAN, click the Remove button.
VLAN Management > Port Settings
VLAN Management > Port Settings
The VLAN Port Settings screen provides parameters for
managing ports that are part of a VLAN. The port default
VLAN ID (PVID) is configured on the VLAN Port Settings
screen. All untagged packets arriving to the device are
tagged by the ports PVID.
Port
The port number included in the VLAN:
Mode
Indicates the port mode. Possible values are:
•
General
The port belongs to VLANs, and each VLAN
•
is user-defined as tagged or untagged (full 802.1Q
mode).
Access
The port belongs to a single untagged VLAN.
•
When a port is in Access mode, the packet types which
are accepted on the port (packet type) cannot be
designated. It is also not possible to enable/disable
ingress filtering on an access port.
Trunk
The port belongs to VLANs in which all ports are
•
tagged (except for an optional single native VLAN).
Acceptable Frame Type
Packet type accepted on the
port. Possible values are:
Admit Tag Only
Indicates that only tagged packets
•
are accepted on the port.
Admit All
Indicates that both tagged and untagged
•
packets are accepted on the port.
24
Hide quick links:
Advertisement
Table of Contents
